Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 05/18/2022 in all areas

  1. Well I thought I’d update the thread, I’ve bought some cutouts for the other side and luckily they are in good condition so I’ve removed all the spotwelds to get the front panel off so that it can be used when it comes to replacing the old upper sill. Some small corrosion so I’ve just used hydrate 80 to convert that so it doesn’t get worse, the panel will be getting sandblasted to remove that surface rust so I have a nice fresh clean panel to weld back in. It’ll be zinc primed or epoxy primed not sure yet. The remaining panels will be used to take reference from. Things such as the lower extension sill and sill to arch join panel, oh and the stiffener too. As these looked far too rusty to use. They will come in handy though as I will be contacting someone regards to the remaking of these panels!!!
    1 point
  2. What a chew on! Glad it's sorted though. Handy that you can swap the wheels with DD though
    1 point
×
×
  • Create New...