hondasport
-
Posts
292 -
Joined
-
Last visited
-
Days Won
18
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by hondasport
-
-
tried something,looks good I think. Will do the other side too.
-
3
-
-
On 23-3-2018 at 10:26 AM, snakey135 said:
Another fantastic build here!! Quality work and dedication... the switch console looks snazzy... what options are all the switches for if you don’t mind me asking?
The red one is for switching everything off, but more for show
the one next to the red one is something I'm working on, is for an intake valve to open and close to get more air into the air filter, and when it's rains, I can shut it off.the other switch is for led lights under the dash and seats, and the other one is for switching on the us-lights
-
I removed the ashuki endlinks and replaced them for hardrace ones.
And a new yuasa battery cause the old one was almost dead
-
3
-
-
Been a while since I visited the forum, shame on me
Here are some updates:
Made a switch console where the radio sits normally.
also bought a few new stuff, skunk2 tb 66mm, new ktuned pro short shifter, and ktuned slave cilynder. I got a s2000 cmc laying in the garage so this will be installed on the car soon.
Also been busy with some wiretucking , still a lot to do but we getting there, will be updating about this very soon
-
1
-
-
-
@Krzys can my picture be changed to a newer one?
-
-
Recently I installed a p30 ecu in the car and had it mapped with ectune, rides a lot better now. Also installed a new buddyclub backbox, instead of the invidia. A bit better sound now. And my custom apexi airfilter intake is almost ready.
-
1
-
-
-
some new pictures also:
-
thx everybody.
Have some new updates.
In the rear I installed a dark ice design upper strut bar. Been thinking what I can do with the hole I had to make in the plastic
And a friend made a custom intake and a plate to keep the engine heat away. Works great with the apexi filter, much nicer sound than the k&n one. Will be further worked on to fit everything perfect and sealed.
Also bought a second handed steering hub, it's one of circuit hero. Much better than my previous one, the holes weren't any good anymore, and I ripped the steering wheel off
-
1
-
-
nice one. red is also my favorite
-
-
nice one!
-
yeah, I will see how it turns out. Maybe I gonna put the oems back on, will see
-
Just now, Chandler said:
being honest mate i'm unsure if i like the MG ZS mirrors
you are not the first one who says that. Will leave them on the car, must see it a few times, not sure if i'm gonna keep them
-
installed mg zs mirrors today.
-
1
-
-
On 7-7-2017 at 7:54 AM, Chandler said:
looking awesome mate, putting mine to shame
to shame? your car is just perfect!
-
-
-
5 hours ago, Krzys said:
Might have been from an MG ZS180 the 26mm bar.
Mine is of a mb6
-
19 hours ago, dmrichards said:
nice touches. what size is the standard front antiroll bar and what car is the 26mm bar from, dc2 I assume?
The 26mm bar is one of a mb6. The most have a 24mm bar, some mb6 have a 26mm one. Don't know why
-
1
-
-
new update, upgraded swaybar to a 26mm one with energy suspensions pu bushings and blox droplinks . Powercoated oem lca's with hardrace bushings. Also replaced outer tie rods with hardrace ones. Still need to do the back, where I gonna mount oem lca's with new oem bushings, and oem rta's.
Also bought a skunk2 rear upper tie bar, secondhanded. Still waiting on it.
-
2
-
-
normally these are the right droplinks. You can check under your car.
http://www.energysuspensionparts.com/16.8104
http://www.hardrace.com/Product_detail.asp?id=2107&Car_Make=7&Car_Model=18&Car_Type=29
Ringo's red mc2
in Honda Civic MA/MB/MC
Posted
It's brushed steel wrap , looks very dark. I've been thinking to redo it in more lighter brushed, something between alu brushed and steel brushed.