Jump to content

Danoteg

New Members
  • Posts

    25
  • Joined

  • Last visited

  • Days Won

    3

Danoteg last won the day on September 7 2022

Danoteg had the most liked content!

Personal info

  • Name
    Dano
  • Age group
    26-30...not so youngster!
  • Location
    Ireland

Car info

  • Civic Model
    CIVIC ES AERODECK
  • Model code
    MC1

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Danoteg's Achievements

Newbie

Newbie (1/2)

24

Reputation

  1. Danoteg

    Brakes bleeding

    I had the same issue after rebuilding mine .it took ages to bleed there's probably air trapped in your abs module .bleed it with the engine running aswel to get maximum effort then go for a spin and try to cycle through the abs a few times then repeat .that solved my issue it took ages to bleed .also be mindful of worn brake pads and discs if they are worn you'll have excessive pedal travel .I changed my front discs and pads and it improves the pedal travel alot
  2. Sorry to revive this thread but I've got the same issue he ball on the aerodeck stock shifter is like 32mm wide and the aftermarket ones are 35 same as an ek/eg.what did people do to resolve the issue
  3. Burnt valve? When did u last adjust the valve lash
  4. Danoteg

    Burnt sparkplug?

    That's completely normal. Stick with standard ngk plugs, cheap cheerful work perfect and just change them more often
  5. As far as I know eg, ek ones are all the same. I have eg ones in mine at the moment and they fit fine
  6. Danoteg

    sun roof!

    Sorry to revive such an old thread lol but was this a whole headliner and sunroof removal job?
  7. Danoteg

    Headgasket :(

    Lol I regularly make sambos on my rocker cover so could have had a spillage ha ha. Car just passed nct (Ireland attempt at MOT) lol emissions were spot on and the car hasn't overheated since, stupid thing time to bin the D and insert B lol
  8. Danoteg

    Headgasket :(

    That was the first thing I done was change the thermostat flush the system and fresh coolant and rad cap. Was looking at them co2 testers on YouTube there today think I'll grab one during the week and do a test
  9. Danoteg

    Headgasket :(

    No haven't tried any sealers, I'm kinda against them lol from what I've came across in work of what they do to the inside of an engine block I'm not to keen on them
  10. Danoteg

    Headgasket :(

    Think I've got the beginning of a headgasket leak, car never over heats unless driven really hard but will however fill the expansion tank so I'm guessing I've got a leak from a cylinder into coolant passage. Odd thing is I commute the car every day in bad traffic and it never overheats, doesn't use coolant runs perfect it's very strange compared to other bad head gaskets I've seen. I've changed the thermostat and rad cap so far and hasn't helped. Also compression tested it and got 200psi across all 4 cylinders so I'm stumped lol. Should I change the water pump or bite the bullet and do the head work
  11. Also forgot to document my headlight mod, split and sprayed and removed the orange plastic reflector thing and removed the clear reflector from the indicator housing
  12. Grabbed some quick pics today between showers, pardon the terrible photography I'm pretty s**t with a camera lol
  13. Thanks lads appreciate it. Will get pics ASAP. Was fitting new cv boots today and went to re do the upper Control arm to the knuckle and the ball joint stud snapped while I was tightening it. Wouldn't mind it's only a month or two old and was only tightening with a small spanner. The joys of Chinese parts I suppose
  14. Only pic I've got so far been busy gonna try take a drive somewhere scenic and get some decent pics at some stage this week
  15. Danoteg

    coilovers

    Don't bother with any coilovers that arnt specifically for an aerodeck as the rear shocks are different heights an ek shock is a lot shorter than the aerodeck one so even with the coils as high up as they go the rear end will be dumped on its arse with no adjustment
×
×
  • Create New...