Rainy

Hi guys! Anyone can point me where I can find base map for D15Z8 ecu? .bin file ideally

I would check ECM module thats inside distributor. I had same issue on b18c4 civic that came

Oh and make sure to measure diameter in knuckle after removing ball joint. In my country they sell like 3 types (38mm,40mm...etc. ) .

You can just pry it out with a flat screwdriver, its just bearing cover and yes you will need press

And B18C4 engine doesnt have vtec oil pressure sensor, so it stays bridged then

Seems ABS was in need of bleeding, did it like suggested and brakes are like new, thank you all

Hi, my ordered obd1 P30 ecu arrived, which is socketed and tune ready but I couldnt find meaning of this bridged connection (purple wire) can anyone explain ?

Will try that on saturday , thanks for response, I put new brakes like 2 weeks ago and discs are within specs so it should be ok

Tried again today, no luck, Iam sentenced to have low effective brakes no leaks, master cylinder was rebuilt like half year ago

Yeo I had help, friend was pushing pedal and I did the bleeding, as I said before we tried everything we could find on google about civic bleeding and brake pedal is still soft and braking effect is only at the very low end. Which bleeding sequence did you used Kink? Same as picture above or different ?

Which one you mean ? Because I tried "gravity bleed" and even pulling fluid out with oil puller

I guess Ruby was your ex car but wth, i tried like every possible way of bleeding but to no avail , last option will be to "suck" air with compressor gun

Hi all, can someone point me in right direction about bleeding brake system ? I rebuilt master cylinder and front brakes and cant seem to bleed hydraulic system (did it like 20 times now, tried bench bleed of MC and different bleed setup I found on civics ). Brake pedal still very soft and effective only all way down.

Martin I checked honda.uk catalogue and cant find anywhere fittings mentioned , only oem side skirts which of course are nonexistent anywhere