Jump to content

Jimbo714

New Members
  • Posts

    28
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by Jimbo714

  1. Just update, new coil fitted and seems to fixed all problems, thanks for all reply’s
  2. Hi... so the civic has been good for 7000 miles since top end rebuild, in till the other day where I driven half a mile down the road developed a misfire, after investigation changed plugs dizzy cap and rota, when I took the cap of and found the rota arm screw loose an stuck to the magnet in the distributor, so all put back together and done a oil change, now the car is intermittent on starting and once it is starting it’s fine but doesn’t seem to be using vtech and a slight rasp coming from the exhaust at high revs. any advice grateful thanks
  3. Jimbo714

    Mb6 exhaust

    Hi all, can someone tell me if the integra exhaust from cat back is the same as my mb6 thanks
  4. Does anyone know if this fits mb6 ??? many thanks
  5. Jimbo714

    Advice needed

    Standard cap, when hot the hoses feel fairly stiff,
  6. Jimbo714

    Advice needed

    should the top and bottom hose feel pressured when warm ???
  7. Jimbo714

    Advice needed

    Took it for a drive and all good now, thanks for the advice, will insure it for the weekend and take it on a good run, see if everything as it should
  8. Jimbo714

    Advice needed

    Hey, put the radiator and hoses all on. An having problems! cant seem to get hot air from heaters, temperature is on half, any help be appreciated
  9. Jimbo714

    Advice needed

    Thanks for all reply’s, just got it back together again, all fine ! Running good and all dry,
  10. Jimbo714

    Advice needed

    Can anyone tell me if this head gasket is the same as my b18c4, as rebuilt the engine, ran it for 5mins and oil p**sed out the the rear of the engine by the head gasket!!!!!!!
  11. Jimbo714

    Advice needed

    Thank you, just waiting to get my head back and can start building
  12. Jimbo714

    Advice needed

    On the hunt for complete timing belt covers front and rear,
  13. Jimbo714

    Advice needed

    Any suggestions on where to buy parts, rings gasket shells etc
  14. Jimbo714

    Advice needed

    Well got this far earlier, gona start with the shopping list of parts I’m needing ,
  15. Jimbo714

    Advice needed

    Got the engine out last night, going to begin the strip down and get the engine on the engine stand
  16. Jimbo714

    Advice needed

    To be fair there both rust free, 1.5 is 80,000 miles and 1.8 50,000, both never been welded, do I have to change the front hubs to allow for the 1.8 shafts, and the Rear roll bar and axle brace bolt straight on the 1.5 ?, also is the clocks straight forwaRd swap thanks
  17. Jimbo714

    Advice needed

    So started getting few bits for the 1.8 engine rebuild, but in two minds to put the engine in my 1.5 or keep in original shell. My 1.5 is real tidy on the bodywork and the 1.8 has some scraps and dents. How difficult is the swap going to be, thought’s please
  18. Jimbo714

    New mb6

    Just had a quick look over and the radiator is bone dry and expansion bottle has a silver thick residual, so most definitely head gasket I would say, but possibly a bit more internal damage???
  19. Jimbo714

    New mb6

    Elderly lady 1 owner from new, m.o.t in till next year not greatly serviced 60,000 on the clock, she recently had a flat battery so got it jumped and was told to pop back out to car to turn it off in half hour in which she fell asleep for 6 hours with the coolant fan not working, so had a quick look as it’s swinging over but won’t fire ???? But for £60 I can grumble
  20. Jimbo714

    New mb6

    Just picked up this complete gem, being hunting for a while and on the chance left a note on window and got the call the other day!!!!
  21. Hi. Can any one help with engine code and hp etc Of a Aerodeck 1.6 1999 ? Thanks
  22. to be fair the accord block does look totally different, shame got two donar cars that can’t nothing with
  23. Just got hold of a accord 2.0 vetch 1998- 99, what amount of work am I looking at to swap engine over ?? Tia
×
×
  • Create New...