[Intermittent starting issues]

Just update, new coil fitted and seems to fixed all problems, thanks for all reply’s 

[Intermittent starting issues]

It’s b18c4 bud,  

[Intermittent starting issues]

Hi... 

so the civic has been good for 7000 miles since top end rebuild, in till the other day where I driven half a mile down the road developed a misfire, after investigation changed plugs dizzy cap and rota, when I took the cap of and found the rota arm screw loose an stuck to the magnet in the distributor, so all put back together and done a oil change,

now the car is intermittent on starting and once it is starting it’s fine but doesn’t seem to be using vtech and a slight rasp coming from the exhaust at high revs. 
any advice grateful 

thanks 

[Mb6 exhaust]

Hi all, can someone tell me if the integra exhaust from cat back is the same as my mb6 

thanks 

[Exhaust for mb6]

Does anyone know if this fits mb6 ??? 
many thanks

 

[Advice needed]

Standard cap, when hot the hoses feel fairly stiff, 

[Advice needed]

should the top and bottom hose feel pressured when warm ???

[Advice needed]

Took it for a drive and all good now, thanks for the advice, 

will insure it for the weekend and take it on a good run, see if everything as it should 

[Advice needed]

Hey, put the radiator and hoses all on. An having problems!

cant seem to get hot air from heaters, temperature is on half, any help be appreciated 

[Advice needed]

[Advice needed]

Thanks for all reply’s, just got it back together again, all fine !

Running good and all dry, 

[Advice needed]

Can anyone tell me if this head gasket is the same as my b18c4, 

as rebuilt the engine, ran it for 5mins and oil p**sed out the the rear of the engine by the head gasket!!!!!!! 

[Advice needed]

Thank you, just waiting to get my head back and can start building 

[Advice needed]

On the hunt for complete timing belt covers  front and rear, 

[Advice needed]

Any suggestions on where to buy parts, rings gasket shells etc 

[Advice needed]

Well got this far earlier, gona start with the shopping list of parts I’m needing , 

[Advice needed]

Got the engine out last night, going to begin the strip down and get the engine on the engine stand 

[Advice needed]

To be fair there both rust free, 1.5 is 80,000 miles and 1.8 50,000, both never been welded, 

do I have to change the front hubs to allow for the 1.8 shafts, and the Rear roll bar and axle brace bolt straight on the 1.5 ?, also is the clocks straight forwaRd swap 

thanks 

[Advice needed]

So started getting few  bits for the 1.8 engine rebuild, but in two minds to put the engine in my 1.5 or keep in original shell. My 1.5 is real tidy on the bodywork and the 1.8 has some scraps and dents. How difficult is the swap going to be, thought’s please 

[New mb6]

Just had a quick look over and the radiator is bone dry and expansion bottle has a silver thick residual, so most definitely head gasket I would say, but possibly a bit more internal damage??? 
 

[New mb6]

Elderly lady 1 owner from new, m.o.t in till next year not greatly serviced 60,000 on the clock, she recently had a flat battery so got it jumped and was told to pop back out to car to turn it off in half hour in which she fell asleep for 6 hours with the coolant fan not working, so had a quick look as it’s swinging over but won’t fire ???? But for £60 I can grumble 

[New mb6]

Just picked up this complete gem, being hunting for a while and on the chance left a note on window and got the call the other day!!!!  
 

[Aerodeck 1.6 1999]

Hi. Can any one help with engine code and hp etc Of a Aerodeck 1.6 1999 ? 

Thanks

[1.5 - 2.0 vetch]

to be fair the accord block does look totally different, shame got two donar cars that can’t nothing with 

[1.5 - 2.0 vetch]

Just got hold of a accord 2.0 vetch 1998- 99, what amount of work am I looking at to swap engine over ?? Tia