https://civic5.com/forum/rss/3-facebook-feed-3-forum-chat.xml/Posts content to facebook from latest news, general chat and other forums across the forumenHi everyone, I have a Honda Civic Fastback 5-door (MA/MB chassis) with the D15Z8 engine, and I’m currently working on a light OEM+ / performance build. I’m looking for information on where to get the VTi-S / MB6 body kit (front lip, side skirts, rear lip, and spoiler). I’m also open to replicas or individual parts, as long as the fitment is decent. I’d really appreciate any advice on: Where to buy these parts in Europe or the UK Any online shops or suppliers still selling them Whether it’s better to source the kit piece by piece or as a full set Experiences with replica kits (fitment, quality, issues) Or if the only realistic option now is second-hand parts or forums I’m trying to keep the car OEM+ style without spending crazy money or chasing impossible rare parts. Any help or links would be really appreciated!!Mon, 08 Jun 2026 07:48:27 +0000So, it seems that admin notifications haven't been getting sent out by the system when new users have registered, meaning there's been 150 user registrations awaiting approval. A while ago we had to change the setup to require users to be approved manually because we were getting a ton of fake accounts with spam posts and dodgy links. Been working through approvals, with newest registrations first, with about 100 left to go. There'll be some older posts appear from new users who've posted but it's not appeared due to the approval being stuck. Apologies to anyone caught up in this.. Please take a moment to introduce yourself and start a project thread - everyone likes to see photos of your ride 😎 We'll be monitoring whether any of the new accounts are spammers, and do the best to keep the forum safeThu, 04 Jun 2026 06:54:44 +0000Hello all, I am writing this topic hoping that someone can help me out. I have a MB3 from 1997 that is in my family since. I am now, slowly, trying to bring it back to a newer state. I have the manuals, the tools and the love to work on it and everything was working well until now. I have changed the front upper arm, front shocks, outer steering, ball joints, all front bushings at lastly cv boots. Note that the CV boots were changed because they were starting to rip but had no holes. Now that I have changed everything it started to make a noise while turning the wheel left and right. while stopped and while moving. It is not the clicking noise that bad outer cv makes as the bearings are bad. It just sounds like a plastic drag sound or a 1 time grind. It is very strange. Almost as when you it a bump whitout shocks. What can it be? where did I failed or what should I check? I know there is a small loose in the inner steering but just a small one, not even 1 inch, that was already before all the changes I made. Also I note that the cv axle while in jack stands goes in and out a bit but they are both locked in the transmission and in the wheel. I do not know if it is normal. Can someone help me? I am just sad as I changed everything and know I have a sound that I had not before. Thank you all for the support you provide in this forum. PedroWed, 03 Jun 2026 20:53:09 +0000Hi guys, the parcel shelf support / speaker cover on my Civic MB3 just snapped. I have an Elegoo 3D printer and I'm looking for an STL file to print a replacement. Does anyone have a 3D scan or a model of this part? ThanksFri, 15 May 2026 00:50:23 +0000Hi guys, the parcel shelf support / speaker cover on my Civic MB3 just snapped. I have an Elegoo 3D printer and I'm looking for an STL file to print a replacement. Does anyone have a 3D scan or a model of this part? Thanks!"Fri, 15 May 2026 00:49:23 +0000Hello Guys. Does anyone knows where i can buy a carbon fiber hood for my MB6? If they exist.Sun, 03 May 2026 20:06:23 +0000Hey guys, Need some advice here. My car doesn’t have AC and from factory it also didn’t come with any cabin/pollen filter. The problem is when I turn the blower on (basically my “highway AC”), I get dust and pollen blowing straight into the cabin. I’ve got pretty severe allergies, so this is becoming a real issue. I’ve been looking around and found that some non-AC models actually have optional pollen filters. So I’m wondering: Has anyone here added a cabin/pollen filter to a car that didn’t originally have one? Any recommendations for filter? I found these: https://www.norauto.pt/p/filtro-de-habitaculo-blueprint-adh22502-688847.html and https://www.norauto.pt/p/filtro-de-habitaculo-filtron-k1017-571378.html Appreciate any tips or experiences 👍Sat, 11 Apr 2026 12:13:57 +0000I found one for sale. Its supposedly the original universal Honda front strut bar, that is supposed to fit on the MB as well. I have an MB3, and it doesnt have the holes pre-drilled for mounting it, so i'd have to drill them myself. Anyone have any experience with it, and could give me tips on whether its worth it or not? Thanks in advance!Wed, 25 Mar 2026 21:56:43 +0000Thu, 12 Mar 2026 19:15:44 +0000Mon, 09 Mar 2026 19:37:53 +0000