Search the Community
Showing results for tags 'honda civic mb'.
-
I'm probably imagining things but after hearing it in every possible intake configuration I have, the questions start rolling. Any time I'm flat on the accelerator and cross the 4500/4600 rpm threshold, the sound very clearly changes tone, not in any way same as a real VTEC, but still in the same kind of sound. It also sounds funny and conspiracy-y because 4600rpm is where peak torque is produced on the D14a8 haha. Still, this is no way a serious post, more like a gimmick for fellow D14 owners to try and find it in their cars and confirm it, have fun lol
-
is it possible to change a 1.6 sohc (shows up to 9k rpm) dashboard with a 8k dashboard (no eco light)?
-
Hey, people I have looked around on the internet about my question but I can't find someone talking about it. I was wondering about fitting a Honda Civic EK sedan 6 or coupe sport exhaust on a Honda MB3 from 2000. Does anyone know if it will fit? I have also looked into an MB3 exhaust system but only the rear muffler costs 280 and up. Any information about this is welcome. Thank you!
-
-
- 2 comments
-
- 3
-
-
- honda civic mb
- honda civic 5 door hatch
- (and 4 more)
-
Hi! Does anyone knows what this round black thing is?
-
03715115-D429-4FE5-9EBC-AA9F995852A3.JPG
MB3Stage2 posted a gallery image in Showcase Members Car Gallery
- 4 comments
-
- 3
-
-
- honda civic mb
- honda civic 5 door hatch
- (and 5 more)
-
-
Hi all, So I can confirm aftermarket seats, without cutting frames or welding mounts to car, are completely possible. If you have read my before method with the universal frames this way is a lot easier and more cost effective. After 3 months of research I found a company called Planted Technology, they produced made to order seat sub frames for many cars. I emailed them to ensure my car was not an EK or an EG. I measured up the cars holes and got back the details of the closest fit frames they make. The Honda Accord 4th & 5th gen have the same interior as the MB3/MB6. I took a risk bought the frames and they do in fact directly fit. I admit it was a bit of a fiddle as they had to come from America so may have been slightly warped or bent on delivery, never the less I got them in as seen in the image below Here is a link to the main page, it would better off ordering them from GSM performance Planted Technology https://www.plantedtechnology.com/products/planted-seat-bracket-honda-accord-4th-5th-generation-1989-1997-passenger-right GSM performance https://www.sportseats4u.co.uk/product/planted-honda-accord-bracket/ Things to consider, these frames do not come with threads. M12 Nuts will be needed to fit seatbelts, M8 Nuts and bolts to fit seats to rails or frames, washers highly recommended
- 1 reply
-
- 2
-
-
- honda civic mb
- general
- (and 4 more)
-
Hi folks. We have just created an updated version of our popular How To Guide No1 - ABS Fault Codes. The new version (2.0.0) now includes instructions for resetting the ABS light if it still stays on after you have replaced faulty ABS parts. You can find the new version in our downloads section or by clicking HERE Hope you like and find the new updated guide useful.😀
-
- 2
-
-
- honda civic ma
- honda civic mb
- (and 3 more)
-
Hey there, I downloaded the Civic manual as I was looking for the bolt sizes and torque requirements for fitting. the LCA bolts are 14x1.5mm but it doesn't say what length they are? I need bolts for the compliance bushing that bolts into the chassis. picture below does anyone know the length of these bolts ? Kind regards
-
Hi everyone, Thought I'd write up a post to help a few people out. Spent 2 hours researching this today. It is possible to fit after market seats in an MB model civic without a tailored/specially fitted subframe. So for all of those that would like a sportier seat, or some racing seats, this is how you do it and what you need List of parts: Seat (of your choice) Universal side mount rails Base mount conversion rails (you will only need these if you are buying seats with base mount/bottom fitting only) How to install seat seat: Remover factory seats and rails from car Remove factory rails from factory seat install universal side mounts to factory rails ( some bolts may need to be removed or cut off) put factory rails back into car with universal mounts attached Install base mount conversion brackets to side mounts install seat to base mount bracket If you have a seat that is side mounts only you will not need the base mount conversion bracket. you can skip step 4 and install the seat directly to the universal side mounts. The great thing about the universal side mounts is that you have a lot of choice in how you can position your seat. meaning you can have more lean in the seat. be higher up or lower down. this is all depend ending on the side mounts you buy and the amount of holes available. List of parts and seats I used to make this possible: Seat - Sparco R100 - https://www.demon-tweeks.com/uk/sparco-r100-seat-7000253/ Side Mounts - Sparco Steel Side Mounts - https://www.demon-tweeks.com/uk/sparco-steel-side-mounts-s-s004902/ Base mount conversion - OMP Base Mount Conversion Brackets - https://www.demon-tweeks.com/uk/omp-base-mount-conversion-brackets-omphc0-0660/ Hope this helps anyone still trying to figure out how to do this.
-
Hello everyone, I’d like to share with you all, a purchase I’ve done via Facebook marketplace, of some OEM Honda MB/MC headlight covers. Bought them from Anthony Vickers, super nice dude who isn’t a scam like you see very often these days. Covers were packed very good so no damage at transport from the UK to the Netherlands thank god! Really stoked about these as you never see them! I like rare stuff so these will look nice in the collection for the car! Cheers!
- 7 replies
-
- 2
-
-
- honda civic aerodeck
- honda civic ma
- (and 4 more)
-
Hello everyone :) I have a Honda MB6 and I would like to know what I have to do in order to fit the ITR DC2 96 (114.3x4) wheels in the MB6. Would be extremely grateful if someone could help me out Thank you
-
Hello :) So I've already read some topics in here about the recommended suspension and the most popular opinion is the mg zs 180 shocks. I'm from Portugal so how can I find that suspension and where are there legit deals? If there are also any more options feel free to give them, thank you!
-
Hey everyone I had my Honda civic MB3 for over a year now but I wanted but put a Bee R rev limiter in de car for some pops and bangs but I have a stock ecu with a 26Pin 16Pin and 22Pin connector of a D15Z8 engine. So my question is it possible to put a Bee R in this car and witch wires do I need to use to make it work. I have looked online for information put I cant find any with this connector type. All of the video's online that I have seen are different wire ring and different connectors.
- 1 reply
-
- 1
-
-
- honda civic ma
- honda civic mb
- (and 8 more)
-
I'm new here and just wanted to show off my little Orleans blue baby. (The original headlights are in the trunk, untill I clear them up) -
Hi, I'm looking to upgrade my exhaust as it currently has a hole and its very loud. I would like to de-cat it and I have seen a solid manifold from gravity performance however they don't sell mid pipe or back boxes. Would anyone have any suggestions for a straight pipe centre piece and a decent back box? Thanks.
-
Hello everyone, This is my Honda Civic MB3, 90k miles. I just came across this forum today, is there any active members? It needs some work doing however its a blast to drive!
-
-
- 2
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
- 2 comments
-
- 1
-
-
- honda engine d16
- exterior
- (and 7 more)
-
-
- 1
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
-
- 1
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
-
- 1
-
-
- honda civic mb
- honda civic mc
- (and 6 more)
-
-
- 1
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
