Search the Community
Showing results for tags 'honda civic mb'.
-
Hello everyone :) I have a Honda MB6 and I would like to know what I have to do in order to fit the ITR DC2 96 (114.3x4) wheels in the MB6. Would be extremely grateful if someone could help me out Thank you
-
Hi, I'm looking to upgrade my exhaust as it currently has a hole and its very loud. I would like to de-cat it and I have seen a solid manifold from gravity performance however they don't sell mid pipe or back boxes. Would anyone have any suggestions for a straight pipe centre piece and a decent back box? Thanks.
-
Hello everyone, This is my Honda Civic MB3, 90k miles. I just came across this forum today, is there any active members? It needs some work doing however its a blast to drive!
-
-
- 1
-
-
- honda civic mb
- honda civic mc
- (and 6 more)
-
-
- 1
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
-
- 1
-
-
- honda civic mb
- honda civic mc
- (and 6 more)
-
-
- 1
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
-
- 1
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
-
- 2
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
Civic Aerodeck and Hatch at Caffeine and Machine
Paricyte posted a gallery image in Showcase Members Car Gallery
-
- 2
-
-
- honda civic mb
- honda civic mc
- (and 9 more)
-
CD6AAC44-645B-4E1A-BA40-817E0172A7EF.jpeg
Paricyte posted a gallery image in Showcase Members Car Gallery
-
- 2
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
BD0247C6-D143-4F3A-9198-5F024A056B8D.jpeg
Paricyte posted a gallery image in Showcase Members Car Gallery
-
- 2
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
8A3F3D97-1BC3-4A7F-968C-C7FFFA34C7D3.jpeg
Paricyte posted a gallery image in Showcase Members Car Gallery
-
- 2
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
DBFD48AD-6A8B-4590-BA29-9709CC69E9CF.jpeg
Paricyte posted a gallery image in Showcase Members Car Gallery
-
- 2
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
EEA71851-1F78-44C4-A389-6E930623D180.jpeg
Paricyte posted a gallery image in Showcase Members Car Gallery
-
- 2
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
B3BFC075-2385-49A9-B2C7-3C68750BDEDA.jpeg
Paricyte posted a gallery image in Showcase Members Car Gallery
-
- 2
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
9A332532-92D7-4DA0-9A5A-470EFBF40B36.jpeg
Paricyte posted a gallery image in Showcase Members Car Gallery
-
- 2
-
-
- honda civic mb
- honda civic mc
- (and 7 more)
-
modified Civic Aerodeck at Caffeine and Machine
Paricyte posted a gallery image in Showcase Members Car Gallery
-
- 1
-
-
- honda civic mb
- honda civic mc
- (and 6 more)
-
Never posted the results of my venture to give the front suspension an overhaul, but it's been done for a couple weeks at least now. Here are some pictures I used to be able to feel the left bearing rotating through my feet on the floor, it was definitely starting to fail, new bearings are smooth as butter. Steering is a bit snappier and direct, but the confidence it puts in the car is awesome. There's hardly any body roll at all, which is surprising considering it's still a stock ARB This thing finally feels underpowered, and I'm yearning for more...next up however, is the rear suspension. Rear LCAs, Camber and Toe arms up next. My Mb2 did not come with an ARB in the rear so perhaps i should invest in one, would it make much difference back there?
-
just taken my trans off as i’m replacing the clutch and flywheel on my mb2, anyone got any ideas on the torque specs for the flywheel and pressure plate bolts? or where i could find them? thanks in advance
-
jan 2020. Got a bit of time so thaught I'd start another project thread document my progress with my latest honda. My last civic ended up quite a machine. But unfortunately I had to make the decision to let it go to buy a house. Once got my finances back on track. I really fancied another mb6 as always had a soft spot for them. A another member offered me a clean car so went on a bit of a road trip down south to pick it up. It has just had an engine rebuild fully documented with every receipt and ran sweet as a nut was very happy with it. Unfortunately it only made it 100 miles back towards the Midlands and the bottom end developed a knock. Was pretty p**sed off tbh. But what can I do.
-
How the the HELL are you supposed to get this lower ball joint out of the knuckle?? On every video I see on YouTube the knuckle lower ball joint has way more clearance than what I got, and it looks like there is quite literally no physical way to get these lower ball joints out without destroying something. Anyone got experience with these? My chassis is an Mb2, D14Z4
-
i have a question for my d15z8 i want to do a mini me but i saw someone say here that the z8 head is the same as the y8 d16 but only with a vtec e camshaft he said that the best option was to buy a d16y8 or z6 camshaft with barings can someone confirm this if this wil fit ?
-
What is the part number for fuel injector in b18c4 mb6 Civic? Can't find direct fit injectors anywhere exept here https://www.a4h-tech.com/en/beck-arnley-240cc-standard-obd2-injector-b-serie-engines seals are sold separately. Some sites also sell these Acura RDX injectors to be fitted to b-series Hondas etc. https://www.a4h-tech.com/en/oem-honda-rdx-410cc-injectors-with-clips-b-d-h-k-f-serie-engines Any idea how much oem part from local dealer would cost? Does Honda sell injectors separately? I only need one. why are the injectors so hard to find for these Hondas?
-
I've passed my anual mechanical inspection. However i was told that my rear brakes' perfom poor. Any ideas what could be the culprit? I've changed everything on my front end brake system but did not change the rear hoses yet. Can this cause the rear brakes to perform poorly?
