lca and wheels question

[hondasport]

I was wondering if this kit would fit our models. I think the bushings in the control arm will, but the one that connects to the subframe is a litte bit diffirent.
http://www.all4honda.com/en/webshop/72-integra-1995-2000/93-suspension/932-pu-rubbers/hardrace-control-arm-bushings-front-lower-civic-del-sol-integra-details.html

 

And I was looking for winter wheels and saw a set of a honda accord. These are 15" 4x114 and et50. But I don't know if there's gonna be enough clearance for the 282 brakes in the front.

[Finch]

1 hour ago, hondasport said:

I was wondering if this kit would fit our models. I think the bushings in the control arm will, but the one that connects to the subframe is a litte bit diffirent.
http://www.all4honda.com/en/webshop/72-integra-1995-2000/93-suspension/932-pu-rubbers/hardrace-control-arm-bushings-front-lower-civic-del-sol-integra-details.html

 

And I was looking for winter wheels and saw a set of a honda accord. These are 15" 4x114 and et50. But I don't know if there's gonna be enough clearance for the 282 brakes in the front.
[Pic]

 15" clear Brembo, Wilwood, Spoon and DC2 calipers with 282 disc, should be no issues  

The DC2 bushings etc do fit afaik, however energy suspension make bushings for our model Civic.. Theres a topic on it here >  

Hope this helps bud!

[hondasport]

thx for the wheels.
yeah, but i'm more into the hardrace bushings that made out of rubber rather then pu. And I must have black ones otherwise I can't get trough mot inspection.

[Finch]

2 minutes ago, hondasport said:

thx for the wheels.
yeah, but i'm more into the hardrace bushings that made out of rubber rather then pu. And I must have black ones otherwise I can't get trough mot inspection.

OK, well the DC2 subframe and steering rack fit as far as I remember so HardRace should be OK

[hondasport]

just looked for the suspension rubbers to renew. Here is what i think should work:
rear lower control arms, hardrace normally for a ek civic:
http://www.all4honda.com/webshop/13-civic-1996-2000/22-onderstel/328-pu-rubbers/hardrace-draagarmrubbers-achterzijde-civic-96-00-2-3-4drs-details.html

front control arms and compliance bushing for an integra:
http://www.all4honda.com/en/webshop/72-integra-1995-2000/93-suspension/932-pu-rubbers/hardrace-control-arm-bushings-front-lower-civic-del-sol-integra-details.html

compliance bushing should normally be the same as the one on our chassis:

[hondasport]

anyone knows if the front lca's bushing where the suspension arm is bolted the same as the one from a integra or eg? Because at the rear the suspension fork is 40mm and a eg is 50mm.