willwroe Posted January 3, 2017 Share Posted January 3, 2017 I've just purchased a set of atr recaros and was wondering if anyone has possibly ran these seats before and know the best way of making them fit. I've got a few ideas but I just want to make sure I'm not overlooking an easier method first! Quote Link to comment Share on other sites More sharing options...
0 willwroe Posted January 3, 2017 Author Share Posted January 3, 2017 Brilliant! I used to have a set of evo 4 seats in my car but I changed cars so now I'm seeing if there's any alternative ways in which I can do these atr's. I'll look in to making new brackets thanks 1 Quote Link to comment Share on other sites More sharing options...
0 Jay Posted February 9, 2017 Share Posted February 9, 2017 Have you done this yet, I fitted dc2 recaros. Stripped the mb6 rails flat, got a machine shop to make some 30mmx30mmx30mm zbar from 3mm thick plate and cut to the appropriate length (£20). Then drilled holes in the right places. Hardest part was making the seatbelt clip brackets. Safty first and all, no half mesures. The bolt is a funny thread. Went to the scrap yard for spare nuts and bolts. Is essential to use the correct type of nuts and bolts for safety fastenings. .. Quote Link to comment Share on other sites More sharing options...
0 willwroe Posted February 10, 2017 Author Share Posted February 10, 2017 Yeah I ended up figuring a way out of doing it. But cheers anyway Quote Link to comment Share on other sites More sharing options...
Question
willwroe
I've just purchased a set of atr recaros and was wondering if anyone has possibly ran these seats before and know the best way of making them fit. I've got a few ideas but I just want to make sure I'm not overlooking an easier method first!
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.