Jump to content
  • 0

Turbo help


Ross Aerodeck
 Share

Question

Right guys. I have a D16 in my Aerodeck

Bought a S200 ECU and a turbo kit. I still need a to buy a chipped /socket-ed P28 as far as I know. Thing is the turbo I got in the kit is MASSIVE!. I'm using it as a daily and just want a small increase in power and run stock engine. I seen some things on Internet where people have run 180 BHP on stock everything so the question is this. Has anyone on here done 180bhp on stock everything and what size turbo did you use. I really don't want to use the big one I got. Think it's way over the top for the HP I want. I was hoping an old Sabb turbo would do the job 

Link to comment
Share on other sites

2 answers to this question

Recommended Posts

  • 0

bolting in a turbo is easier than a whole engine conversion though ( plus you need to have the engine and all thats required for the swap) and the turbo route is probably cheaper.

 

Depends what you want from the car, as we know modding is an individual thing. The D series respond well to boost

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...