Jump to content

Recommended Posts

I then had 1 weekend in which to swap everything else over on to the new shell including fitting the b18c4 from the vti and have it ready for a mot on Monday morning. It was a hard weekend but I got it done

20190519_140043.jpg

Screenshot_20201006_225725.jpg

Screenshot_20201006_225736.jpg

Screenshot_20201006_225702.jpg

  • Like 1
Link to comment
Share on other sites

I didn't make it to work or make it to the test station. I made a huge mistake thinking it had wiring issues and drove it with the oil light on. It managed 27 miles until it died. That's it. The 74k miles healthy none smoking b18 was dead. I was gutted. Starved it of oil because I'd fitted a sandwich plate and blocked it off by mistake. 

  • Sad 1
Link to comment
Share on other sites

Anyway after I got it home it was all cleaned up and poured some oil through it and cranked it over by hand to make sure it was OK. I put a new cambelt kit on it and Waterpump, the rocker cover from the b18, got some nice Magnacore kv85 leads and swapped the s4c gearset into the s9b casing. Also got a full mongoose exhaust system and japspeed manifold to go with it and in it went. 

Screenshot_20201006_231118_com.facebook.katana.jpg

Screenshot_20201006_231326.jpg

Screenshot_20201006_231252.jpg

Screenshot_20201006_231309.jpg

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

My k sport coilovers were pretty b****red so it was time for a change so I picked up some Hsd momopro coilovers which sit much lower than the ksports and a brand new set of white Pro race 3s which I'd been after for a while

20191231_100549-1.jpg

20200520_202648.jpg

20200520_202707.jpg

20200520_202630.jpg

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...