Jump to content

Recommended Posts

Hi guys! Just got my oem bbig foglights.. my deck didn't have any so have to change the switch. But one set of wires was cutout can you guys help me find out where does the cut wires go? And will i need a separate foglight relay or controller?

IMG_20210326_122319.jpg

IMG_20210326_122334.jpg

Link to comment
Share on other sites

Hi Tony,

 

There are 3 separate harnesses for the OEM foglights. One in the dashfrom the switch to fusebox/harness number 2, Harness number 2 which goes from bulkhead to just behind drivers side headlight, then harness 3 which goes from behind headlight to the fogs themselves. there is a relay you will also need which is fitted either on the interior fusebox or near it, can't quite remember which! DD had them fitted by Honda at the dealership after we bought her. I did however retro fit oem fogs to my first Civic M, my MA8, so thats how I found out what is needed. It is a bit of a pain to fit, but is worth it for that OEM look.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...