Jump to content

Custom ducktail aerodeck spoiler


Aerokek
 Share

Recommended Posts

Started with a little experiments a few months ago, just something to keep me busy in between jobs etc.

 

Started out with an extra stock lid that goes on top of the trunk. Added a piece of plastic to lengthen it, melted it to shape and filled it with expanding foamScreenshot_20210510-135505_Instagram.thumb.jpg.7d868462cdb01b1622d880dce916a437.jpg

 

This was still super experimental, started to cut the foam to shape but to start over since I wasnt satisfied with the basic shape.

 

Screenshot_20210510-135517_Instagram.thumb.jpg.47edfc7eaf9dc449e2dd18d085eec21c.jpg

 

Also the third brake light position wasnt much to my liking. So back to the drawing board!

 

Screenshot_20210510-135501_Instagram.thumb.jpg.790022056dea948f60deedee0b1e16d5.jpg

 

Felt it was too short to, so I extended it using a Citroen C3 rear wing thingy.

 

IMG-20210302-WA0011.thumb.jpeg.6eef5871e3fe01c81aa335851e8f6cd9.jpeg

 

IMG-20210302-WA0013.thumb.jpeg.8d8be8ce13d09d2c1b0ac4e53ba106a9.jpeg

 

Screenshot_20210510-135523_Instagram.thumb.jpg.e39770aaf800bbe3773e016c9994762a.jpg

 

This was long enough, so I was off to shaping and smoothing

 

Screenshot_20210510-135531_Instagram.thumb.jpg.fed73816c81dc5a9b7f5c7b0216a3d8f.jpgScreenshot_20210510-135539_Instagram.thumb.jpg.961c1db8b52fcedfc8e8a52ecf0afdd6.jpg

 

filled everything up, fill, sand, repeat.Screenshot_20210510-135546_Instagram.thumb.jpg.1c89318b7e2afefe080dea2447ac19de.jpgScreenshot_20210510-135549_Instagram.thumb.jpg.26eb37cb3717f5973cd4d78bf5ed67f5.jpg

 

sprayed some primer on it, more sanding. Tried to use lines to get it as closely symmetrical as I could.

 

IMG_20210315_181854_917.thumb.jpg.681b2a31219a9b7ad5a1ac3c5b440986.jpg

20210315_181735.jpg.c1ab02f3ca048c2a4d86fa4d3b49f8fb.jpg

 

Now I needed to fill in the underside too, I've kept the third brake light in its original location. Used foam and glassfibre to create a strong base.20210424_153630.jpg.98c7273eab575e5afa98dea419f57fa0.jpg

 

20210424_153638.jpg.7f659264dc66eeec90a65bf3de9e30ff.jpg

 

Again, loads of sanding and filling to get everything nice and smooth.

 

20210510_141836.thumb.jpg.9d393be975bf22cfccdadd7122b6bdd4.jpg

 

20210510_141846.jpg.8c27cec98e1015d4f0ac77cd911bc142.jpg

 

Almost there! Have to figure out a way to shape the surrounding filler to fit the third brakelight nicely.

 

Edited by Aerokek
  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...