MrMasman Posted May 1, 2023 Share Posted May 1, 2023 Hey all, I'm currently putting some hardrace components on my X plate (2000) fastback, 1.4 d14z4. I didn't bother getting new wishbones for the front lower control arms, and have just taken them off the old control arms, given them a good clean with 240 grit sandpaper and a steal wire brush. New control arms and compliance bushing fit great, I have all the torque specs except for the single nut and the bolt that attaches the front lower control arm to the wishbone. Everything else is 47-66 ft lbs, so if I can ballpark it around there that's cool 1 Quote Link to comment Share on other sites More sharing options...
MrMasman Posted May 1, 2023 Author Share Posted May 1, 2023 If nobody know's that I'm talking about I can provide a picture. It might also be referred to as an A arm? Not too sure Quote Link to comment Share on other sites More sharing options...
dr_broon Posted May 3, 2023 Share Posted May 3, 2023 Have you got a copy of the Honda workshop manual from the downloads section? All of the torque settings should be in there. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.