Jump to content

MC2 Project - Chassis prep


DeLaSoul
 Share

Recommended Posts

13 hours ago, Vtisgilman said:

Good progress being made here. How did you attach the MSA tow loops? I need to fit them to my track car but nothing looks strong enough. Especially at the back 

@Vtisgilman In the front I decided to remove the fog light and cut the slot through the slam panel so I could get to the inside of the towing bracket. The photos show the slot but not the bolt. On mine, it's one of the splitter mount bolts. I'll try and take a better picture tomorrow.

 

In the rear, I'm going to make a simple frame the goes back to where the tow bar would have mounted down the chassis rails. I'll put in a cross piece so I can mount the diffuser off it so it actually works.

Link to comment
Share on other sites

To mount the front tow straps, I put a hole through the front cross member to get the strap through

BxXt6btP6_DwyB83WztRzTrsb8FD5XdQGB5Jm_tc

Made a matching hole in a set of fog light covers

rVWh2s3mAcgJvpTDUsYpqUUk25tVMkbSdkWne0Ok

I used the top bolt from the BYC splitter mounts and put a nut on the back

z9dwuy80FQOloZoXqOxj1m8gvYX_3ZZTggwygx1g

S9yL2Uqh_haw4QQOnIKiqlSx4Wa2RfIvng4kVa5B

 

 

 

Link to comment
Share on other sites

  • 4 months later...
  • 3 months later...
On 1/8/2020 at 7:24 PM, Blackwolf said:

This thing is so awesome so much work gone into it. hows the progress been on it since 

@Blackwolf Sorry I've been updating Instagram as it's very easy to press upload to photos.  Lots of minor updates, you can find me under delasoul_99

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...