FREAKBOY

I had an issue once where it was getting fuel but no spark was a TDC sensor issue, but a few other things could cause it.

Sorry Josh I can't remember the lead sequence

josh, the whole dizzy is the same age as the turbo, had to change it for the conversion, it's a TD-41u which is quite a common part. I'll admit it, I didn't change plugs or leads since converting.

Sounds like the pipe has perished over time, it's been on a few years. I know you were planning the head swap, just to let you know that I don't think your P06 ecu has vtec capability. So if you do the head swap you'll need to address that with an auto P28 or similar, alternatively you might be able to get vtec added in to the board.

Don't know if it's any good for you but this link would be a direct replacement if the turbo has actually gone http://www.ebay.co.uk/itm/T3-Turbocharger-Turbo-A-R-42-Stage-III-Civic-Focus-/111504584202?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19f630ee0a

WTF!!! what went?

10 was enough for me, have you swapped that wastegate over yet?

yes I did the 10psi boost cut in Crome for safety, plus, it can't go over 10.6psi without getting a 2 Bar (or bigger) MAP sensor.

Unfortunately CromePro is registered to the machine it's on. If it wasn't you could have had it for nowt. You can always datalog using a free program called freelog.

H Josh, there are 4 new spare injector clips in a clear plasic bag in the box of spares I gave you. They're the right ones, you might get away with just nicking the wire clip from one of them.

Well guys I put the Freakwagon in for MOT for Josh today and with a bit of minor stuff it passed, so one step closer to heartbreak day . To be fair i'm chuffed someone with Honda passion is getting it Hope the Mrs recovers ok Josh

SOLD

FREAKWAGON IS NOW FOR SALE ON HERE AND EBAY

I didn't get round to covering the gaps, however, the best way to cover it would be to get a spare piece of strip from another deck and simply slide the strips up to each other. Then the bars are off the black strips just slide in the channels. Cover the joins with a bit of black tape

It's for sale in classifieds