belfastlad123
-
Posts
395 -
Joined
-
Last visited
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by belfastlad123
-
-
Flushed the rad again on sat and now the gunk is back lol.
Sorta need to know before i put arches in the car.
What tests can be done to find out for definate.
-
Forgot about this lol
When I bought the dc2 it had radweld or something in it. Its been flushed a good few times from that but that crap sticks to everything.
Maybr its just comin out now. I flushed it again on sat. Ill see how it goes.
-
I took bottom hose off rad and run a hose through it and washed expansion bottle about a week ago.
Now theres more gunk than there was the first time. Ill do it again every couple days and see how it goes.
-
I flushed it last week when I first noticed it. It seems to have gotten worse. Ill flush it again tomarrow and give it a few days.
-
Oil cap and dipstick is spotless.
If the oil was getting into water would it not use a lot.
-
There was anti freeze in it but I flushed it out when I first seen the sludge last week. Now its back alot worse.
I have a b18 if that matters
-
im doing atleast 50 miles per day, my work is 25 mile away. 24 of them is motorway lol
-
have noticed a bit of stuff on my water cap this past few weeks.
i flushed the water bottle of it all and it now back again.
car is not using a lot of oil or water. was using a bit of oil but not lots. just burning it off.
-
bit of an update. got the car running right. the clampets that fitted the engine had plugs swapped around. icv and knock sensor. car running spot on now.
have fitted 96 spec hubs, dc2 dual bend shifter, ek9 mats. spoon n1, ek9'd headlights, tegiwa intake.
next on to do list is.
paint dc2 wheels
paint rocker
get back arches done
get type r lip (have grill to be painted)
get car detailed to get rid of lots and lots of swirls
scrub engine bay
wind deflectors
few fiddly other bits to sort out.
few pics over the last few months still a fair nit to be done lol
-
sort off, car still running crap. think iv narrowed it down to a wiring fault.
have fitted spoon n1 and have 2 96 spec hubs on lol its a mess atm, has been getting used as a workhorse. debating whether to finish it or get rid.
-
lucas steering leak if its not to bad
-
what ecu can u use for my car, has a jdm dc2 in it atm but the car is not wired for eld and knock sensor. can i use the likes of a uk dc2 ecu in the car, without any mods ?
-
ok have sort of figured it out. it seems jap cars have an electric load detector and a knock sensor and my car dosent have either. so just have to figure out how to sort it.
either need a jap fuse box and wire it in and new knock sensor and wire it in. or bypass both, yous think its a good idea bypassing ?
anyone have any idea how much getting an ecu chipped to forget about these would cost ?
-
this is the way its going when it idles normal that is me lifting the peddle with my foot. in the morning when the car is stone cold, it wont tick over untill i rev it for a few seconds.
any ideas
-
i know what the icv is but would the other 2 make the car hunt ?
see the isent completly closing properly when the cable is on but springs back perfect when the cable is on.
the engine in the car is now a jdm b18 with standard dc2 ecu. when i hold a rev between 1 and 2 k revs it revving up and down. a real pain when your driving.
-
cant slacken the cable without making it idle wrong , can i ??
cleaned the icv, cleaned throttle body out with carb cleaner.
got 3 codes, 14 icv, 20 knock sensor, 23 electronic load detector. what are these lol
-
just put b18 into my ek. when the car is warm the throttle is sticking at exactly between 1 and 2k revs, and its hunting just at these revs.
when i put my foot under the peddle and lift if slighty the car drops to where it should normaly idle and idles fine.
was thinking its something to do with air flow but made up a temp induction kit with air sensor and breather pipe drill into it and it still doing it any ideas. EML light is on too. any ideas anyone ??
-
i had a set in mine if yoy can find it in the members gallery, its red
-
http://item.mobileweb.ebay.co.uk/viewit ... 5403239880
they are the same as these, thats the first link i found you might get them cheaper if you have a look around
-
it might not be off an astra ive seen another one with the same one on.
it actually looks good so dunno what to do lol
-
i havent a clue the spoiler is in the dc2 and cant get near it.
im nearly sure its off a mk4 astra lol
-
the spoiler thats on the car in the first pics.
raging the car is not ready to atleast tuesday. been driving a ford ka for a week. dont know how much longer i can stick it lol
have you been aproched by other men yet for a good time?
![[ghey.gif1]](https://civic5.com/forum/uploads/ghey.gif)
dont remind me what i look like driving it llf -
the spoiler thats on the car in the first pics.
raging the car is not ready to atleast tuesday. been driving a ford ka for a week. dont know how much longer i can stick it lol
-
there was a whole f**kabout with the guys doing the work which is why it has took so long, now its sorted i should have the car back on sat hopefully, that will be a week he has had it so should be well done by then.
might stick the spoiler back on to the car is going to be painted to get the boot painted have 2 new arches to go in, these are rotten.
next plans will be
type r rep grill and lip
dc2 wheels and hubs fitted
spoon n1 rep fitted
dc2 shifter
was going to take steering rack but a lot of bits need swapped over to make it fit, probably not another update for a while as im moving out and will probably be fleeced lol
cheers
Aerodeck vti-s
in Chat Lounge
Posted
Was there not a whole messup at honda when the cars were registered. Some are vtis on logbook but vti specs