Jump to content

col

Member
  • Posts

    94
  • Joined

  • Last visited

Posts posted by col

  1. Sorry to say the civic has now been sold - an the new owner is putting his stamp on it already.

    Didn't really want to sell her, but my mrs step dad decided to part ways with his mr2...

    He looked for quite a while before he settled on this rev 5 and i asked for 1st refusal if ever he sold it

    it really is immaculate:

    DSCF1116.jpg

    so thanks to everyone to has given advise and helped out along the way - i'm off to give her a wash and polish

    col

  2. bit of a diy job but putting it on a 4 post ramp and running it in gear with sand paper sounds like my plan for monday...

    several different grades of paper and a bit of metal polish should be grand... lets see how it turns out...

    how did you get on?

  3. Just had a bit of a result with the exhaust...

    was watching one on egay that didn't sell so offered the guy £25 which he took as he was clearing out his sons stuff, turned up to collect it and have bagged myself a hks hi power system with straight through pipe and he even threw in a standard mani and a fuel pressure regulator.

    money well spent

  4. Thought I'd start a little project thread for my VTiS

    At first there was no need as I planned to keep her original, but now I've been bitten and there will be a few changes coming in the not so distant future.

    As I got her:

    DSCF1055.jpg

    DSCF1056.jpg

    after full zs180 setup including rear arb

    DSCF1089.jpg

    now handles as it should have done but there is still a bit of an arch gap...

    bought these for a pinch but as they've been sat around a while will require new tyres, and they're quite far down the list.

    ultra RARE kosei rims, should fill the arches a little more, but may still end up with a set of lowering springs at some point

    these also need new allen key heads as they were taken off by previous owner with a view to replacing, but now i'm not sure where to get new ones

    DSCF1090.jpg

    She's also been treated to a full service - ALL fluids, filters, belts and ignition components, cup holder, heater matrix, new parcel shelf.

    this month should see:

    zs grey door cards or standard ones re-trimmed in alcantara, just waiting on a sample of the fabric.

    rocker cover repainted

    tegiwa vtec solenoid cover

    zs wind deflectors

    exhaust

    induction kit

    my fogs returned from being reconditioned

    new headlights as mine are crazed and yellow'd

    more pics to follow with progress

    col

  5. ok, just to add a little something extra to the mix, swapped my suspension over the weekend, directly off of a zs180.

    the rear springs had no markings, where as the fronts had blue, orange and a little bit of white paint.

    ride is so much firmer with virtually no body roll, and it corners like it should have done in the first place.

    zs is now wearing civic setup and looks hilarious.

  6. FIXED!

    on closer inspection, there are some witness marks on the cable/ metal loop assembly, that should line up with marks on the car, the whole lot had been pushed down, so a few technical adjustment with a hammer and hey presto. fully functioning boot!

  7. its a common rover/honda thing mate, the bumpers do sag there after time. just replace the screw clips behind the rear wheels with a 10mm nut bolt and washers, make sure the bumpers sat on the white hangers as well.

    col

  8. Didn't know where else to put it so it's going in here.

    Bit of a strange one but my boot won't shut, and lock without a great deal of unnecessary force. I have to literally throw it down with both hand to get it to lock in place, but when i do, it won't then open on the key, only by pulling, quite hard on the boot release lever.

    there's nothing i can see thats out of place, it's just happened overnight, anyone any ideas or suggestions?

    col

×
×
  • Create New...