Jump to content

frenkslo

New Members
 View Profile  See their activity

  • Posts

    37

  • Joined

  • Last visited

 Content Type 

Posts posted by frenkslo

    Civic MB6 Dakota Bronze SpecR 2012

    in Honda Civic MA/MB/MC

    Posted

    Hey guys, finaly got a hub from an ITR momo srs wheel. It was blown and in bad condition. I bought only the hub for a little money. I interchanged the hubs bettween the wheels and now it can be fitted to my mb

    To clear out some thing about the fitting, i saw alot of questions about the momo wheels. U can follow my lead but only if u have an MB6. :)

    The wheel must be from an ITR not ATR, the only momo wheel with srs that will fit MB6 and EG and maybe some other older hondas. The srs connector is the same so no problems here (no srs light on), only problem i have encounter are the side markers, they dont want to turn like they used to. I think i need to rotate the wheel more to get it to switch off, but i'm not worried about that ;);)

    About fitting procees, not so complicated, but do put your negative and positive connectors off the battery. Some say you should wait about 5 to 10 min, but i rather waited for 30 min so my airb bag wouldnt deploy in my face

    Lovin the wheel every second i drive it :D:D

    Some picures:

    2012-11-09130556.jpg

    2012-11-09161905.jpg

    2012-11-09125426.jpg

    2012-11-08191447.jpg

    2012-11-08191431.jpg

    Civic MB6 Dakota Bronze SpecR 2012

    in Honda Civic MA/MB/MC

    Posted

    Got to update my thread so it wont die ;) Been busy with modding my mb6 :)

    Lets talk about mods. First i've changed my old B18C4 exhaust manifold with B18C OEM manifold (2.5) it came with the engine when i bought it. Instead of leaving my cat on i've decided to put a decat on, two boxes (back and middle) and the pipe is now 60mm all the way throught. Got a better response from the engine and it revs a lot nicer now. :P Vtec crossover is now more audible. I like it! I went for the stealth version beacuse of the cops....

    New exhaust

    2012-09-17164849.jpg

    Secondly i've changed my old airbox with an ITR OEM airbox, got it for a good price, and it even doent have any scratch on it. Fit it on the original mount, where the old one was mounted, for the second mount i've made a home made bracket. It sits really nice, no movement at all. Result is a more nicer vtec crossover and louder engine, better response, this modd is a must have. :mrgreen::mrgreen:

    Exhaust manifold & ITR airbox

    2012-09-23144356.jpg

    Here u can see i've changed the rad hoses. The old ones were leaking so i've changed them with tegiwa silicone hoses. I decided to go with the red colour.

    Painted my calipers, i think they look nice!

    2012-09-17164725.jpg

    ATR MOMO steering wheel (doesent fit) cry.gif1

    2012-08-16155935.jpg

    It was time to service the engine. I've changed the rocker cover gasket and that 4 round gaskets around the spark plugs. Spark plugs were changed with new NGK ones PFR7G-11. Changed my engine oil (Mobil1 5w-50) and oil filter (hamp)

    And some pictures of the car

    2012-09-17164721.jpg

    2012-09-17164702.jpg

    2012-09-17164649.jpg

    At night she is brownish :P

    2012-09-14203836.jpg

    2012-08-29194013.jpg

    water sound from door

    in Interior

    Posted

    :lol: so there is a drain in bottom of door....ahhh, to be honest i havent looked into it yet, but if there is a drain that might explain it, cheers buddy 1"£££$££"!!

    did u fixed the problem?? :roll:

×
×
  • Create New...