[HONDA CIVIC EJ/EK (Type-r 1996-1998) front grille to MB1 (and MA8-MA9) (pre face-lift).]

HONDA CIVIC EJ/EK (Type-r 1996-1998) front grille to MB1 (and MA8-MA9) (pre face-lift).    

 

Will it fit?

 

 

 

Thanks

 

 

 

[MB1 D16Y3 Disc brake conversion - upgrade to MB6]

MB1 disc brakes (hubs+rotors+discs, 262 mm front – 239mm rear) upgrade to MB6 (282mm front – 260 mm rear)

                     

Can it be done?

[MB6 Front lip on an MB1 (and MA8-MA9) bumper.]

Yes, it can be done with a little modification.

                              

I think, my refinishing man cut a short portion at the centre of lip, then he joined the 2 pieces and he screwed them directly on the bumper without any problem.

 

The result is awesome!

[HONDA INTEGRA DC2 STEERING WHEEL ON AN MB1]

Hello there. I've searched the forum here and I found out that this steering wheel

 

http://www.ebay.com/itm/ACURA-INTEGRA-DC2-B18C-TYPE-R-OEM-SRS-MOMO-STEERING-WHEEL-JDM-DC2-ITR-STEERING-/262271509980?hash=item3d1099a5dc:g:hAMAAOSwFMZWr9M8&vxp=mtr

 

fits exactly (with no mods) to an mb1, am I right?

 

My whole story is : I had an awful non-srs steering wheel, so I changed it to the OEM MB6 steering wheel form a guy here.  I managed to install it with the clock spring.

 

But, the steering wheel has wear and tear. So, can I just buy the above one and plug and play?

 

Also, what other steering wheels (srs with leather strap original Honda) can I fit?

 

Thanks

[MB1 (and pre-facelift) front grill]

Domani pics for comparison-

http://specs.amayama.com/honda/domani/1992_10/photo/

Thank you my friend.

So, we are searching the known sites, especially in Germany, and if we are lucky, we buy the grille for mb. I 've seen a few of them on ebay.

Thanks

[MB1 (and pre-facelift) front grill]

Hello there again. Does anyone know if the grill from the japan Civic (ej/ek) fits directly to MB1?

I'm asking this because I've seen on ebay many many grills debadged for the japanese Civic, so it would be a chance for me to get one of those grills.

Many thanks

[MB1 SRS clock spring]

Well, I had the right one (clock spring),and finally I installed it! I mean the clock spring. It was the right one from the begining

but my previous mechanic was for rubbish. He didn't understand how to install it.

Now, it's installed propertly. I have horn, thanks God.

Conclusion...

All M's (regardless facelift or pre-facelift) DO HAVE the same wiper-indicator stalk AND THE SAME clock spring (airbag squib).

Whoever has the ugly 3-spoke non srs steering wheel it's piece of cake to put the 4-spoke srs one.

The Honda part code of the clock spring is...77900-st3-e81

The Honda part code of the indicator-wiper stalk (on which the spring is fitted) is..35251-st3-g81

They are the same for all M's

[MB1 SRS clock spring]

Hello there.

Does anyone know which type of clock spring do MB1 have?

I think that MB1 had 2 different clock springs during their lifetime. The most common one, which also fits to EJ/EK series isn't appropriate for my car.

I would be grateful to you if someone could tell me precisely which clock spring my MB1 has.

Many thanks