Jump to content

kenny_tmt

Member
 View Profile  See their activity

  • Posts

    154

  • Joined

  • Last visited

 Content Type 

Posts posted by kenny_tmt

    Aftermarked subframe ?

    in Chassis

    Posted

    Thats an ASR subframe/Lower chassis brace, not an actual frame as such. Just a big plate that bolts on top of the rear frame. Is used (advised needed) on EGs and Non Type R EK/EJs so they can fit bigger DC2 or EK9 rear anti roll bars, as the rear frame is considered too weak for the higher stress bigger ARB's off Type R's. Has been seen to crack on EKs and EJ9's.

    Although the bottom arm mounting point should line up (but Im not sure of that) as the EG rear arms fit, you would need to fabricate the rest of the bolting support as it uses the stock ARB chassis holes to mount on, then the ARB mounts on top of the new brace.

    In thoery If you could fit this brace to an MB/MC then you would be able to run the likes of DC2 rear ARB or the ASR bigger adjustable one.

    Thx!

    Kenny_tmt's Silver MC2/ Little update pg4!

    in Honda Civic MA/MB/MC

    Posted

    So had a big sprint weekend, big test for my b18c4 and the aerodeck! Killed almost every b-serie over there lol! I only got killed by one car, Renault Megane RS from the Renault f1 team lol! GRTZ

    Movies..

    VS Integra

    LreCv9Qg4Sc

    VS Mazda MPS 310pk

    dZeit4pXwkY

    VS Impreza WRX 300pk

    WAASZsdZfBY

    VS 200SX 280pk

    D0NuhJZ2ef4

    VS 323 4WD 1.8 Turbo 170Pk

    tL0_FGBUCtg

    Vid Fixed MOD!

    Kenny_tmt's Silver MC2/ Little update pg4!

    in Honda Civic MA/MB/MC

    Posted

    Oké a lot going out, first of all the mc2 is tuned on the dyno and making 214.9 bhp and 199Nm of torque. Before any tuning the car made 204bhp with the ITR cams and the 2.5inch catback and the tri y header.

    So the tuning was done with the nex setup:

    OEM b18c4

    Oem B18C6 itr cams

    Oem itr valvesprings

    Oem itr valve retainers

    Edelbrock Performer X Intake manfiold

    Skunk2 66mm TB

    3 inch air intake

    Highend perf. header 2.5inch

    Decat!

    home made catback 2.5inch

    S80 tranny

    OEM LSD

    Fidanza lightweight flywheel

    exedy OEM replacement clutch

    Tuned on Hondata S300

    I also bought some new wheels, Team dynamics pro race verry verry leightweight Tyre + rims 13.5kg!

    DSC_0363_zps0c973ee5.jpg

    Dynosheet before vs after (wheel horse power 188.9)

    dyno_zps22ed2056.jpeg

    Movie on the rollers:

    http://youtu.be/zwKpC6vMYHo

    Picture of the wheels:

    31470_10200504893758945_1321201536_n.jpg

    Kenny_tmt's Silver MC2/ Little update pg4!

    in Honda Civic MA/MB/MC

    Posted

    :geek: any updated info,also what ecu used with the hondata S300 p28/p30/p72 ect..

    did you do any dataloging youself :?:

    did they email you base map

    or installed on the unit

    s300v2

    s300v1

    s300J

    as i have p72 virgin atm thinking of chrome and moates2burnand socket with chip and modify,got wideband inovate to go on soon.

    may just go the easy route ??

    but dont know the easy one above to chose.

    I could cancel moates2 and get s300j :idea::?

    Really want to diy and not pay shop tune £s :|

    I have the S300v2.

    You can easy upload every base map you want. If you install the hondata software manager and open a new map, you can pick almoste every stock OEM honda map and upload it into your ecu. I never dit dataloging, Always tuned on the dyno. If you want i will send my maps I have with the speclist.

    Grtz

×
×
  • Create New...