[Timing problems]

@EmZvr The bridge service plug stops stock ecu making adjustments while manually set ignition timing

 

I think hondata feature do the same thing.

[Timing problems]

Yeah, I dont need to get 16 BTDC, need to get 12 BTDC.

No need to bridge the service plug with the hondata "set timing" feature.

All the pulleys are from Y8 so thats not the problem.

Is not possible to have the dizzy 180º rotated without open, disassemble and modyfy internals to do that.

 

 

Someones says that they had to modify the distributor holes to rotate a bit more and reach 12 BTDC.

[Timing problems]

Anybody else know how to solve it?

[Timing problems]

Distributor should be compatible. Which cylinder are you using for timing light?

 

Cyl 1.

 

Thanks!

[Timing problems]

Hi guys, how are you doing?

 

I have an issue with my car: its a '97 MB3 with a full d16y8 swap and greddy turbo. I have it tuned (badly) with hondata s300v2 . I was learning and practicing with the ecu before going to a dyno/tune shop and I discovered that I can get the base timing I want.

 

Ive tried to set the base timing with the hondata feature, either 12 (supposed Y8 BTDC) or 16, but Im always far from it even rotating the distributor to both sides.

BTW, The cam belt is properly installed, there is no theeth off or such things.

 

I have the distributor rewired, but I dont remember if the guys who do the swap used the Y8 or the Z8 distributor. ¿Wich one should I been using? ¿are they compatibles?

 

Thanks in advance!!!

 

oh! this is my car:

 

https://www.facebook.com/media/set/?set=a.309988735795654.1073741830.306427939485067&type=3

[Front Mb3 ARB bushes & drop links]

Thanks for the quick response, but I need the size because I want to replace it by a poly ones.

[Front Mb3 ARB bushes & drop links]

Hi everyone!!! I need to replace my front ARB bushes & drop links, I know the front ARB is about 20mm, but not sure if 20mm or 21mm. Can you give me the right option?

and if possible a link to those bushes and drop links.

thanks.