marko

How hard is it to delete the ABS?

You can put it up for reference if you want shouldn't be to difficult to find with the search bar

I can do the old bridge pins and get the code for the exact fault can't I or does it not work like that?

:/ why does she do this to me? Just gave her loads of shiny new parts aswell I think is A B*ll Sh*t light

did it have the mb6 gear box or a dc2/eg/ek box with shorter ratios?

whats this metohod i dont wanna do mine again need a new centre console after the last time :/

x2 exactly mate 1 neg feedback in that last 12 month and about 30 neutral as i said cant complain about them one of the boots on the hb bearing area was ill fitted but only took a hair pin behind it to flick it back and get it sitting right, no sliders but new boots for the sliders and you can buy the slidrs for around 15-20 an axle if you look around

i think mine just has a bit too much slack in it still works and since ive drove it a bit the have bedded nicley and now it dosnt roll down the hill when i get in it :/ haha

its your money pal only trying to save you a little i had two of them fitted they have been a dream no more abs taking over my braking and doing a terrible job of it, and at 40 a side including a 15 surcharge so if you sent the others back they would be 25 a side plus a 2 year warranty from the sellers bargain youll need a mech to fit them to keep the warranty though

have a brick handy when you park up my hand brake is worse now both sides work and i live on an incline the first day i was back in it i parked up came back out later went to open my door and the car sloooowy rolled a metre or 2 back before it stopped :/ but yeah buy that caliper or the relevent sided caliper and get a mech to fit it, if you look about enough you will find one that will fit it

http://www.ebay.co.uk/itm/Rear-Right-Brake-Caliper-To-Fit-HONDA-CIVIC-CAR1778R-260mm-Brake-Disc/370982661424?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D22311%26meid%3D7235902810320585090%26pid%3D100005%26prg%3D9701%26rk%3D1%26rkt%3D6%26sd%3D230997254768&rt=nc buy these and stuff the garages liability they dont come with sliders but you can get them for a little extra if you look around ebay

http://www.larkspeed.com/index.pl?a=i&p=D45328 these are only 65 but you'll pay 10 for shipping be prepared for a wait when you order tham as i assume carol hand makes all the leads and she took the p**s making mine just cant get good help these days *sigh*

ive never used copper grease on my brakes as i hear the copper can interfere with the ABS sensors and i hate it when my ABS interferes with my braking, all this is just another reason not to put copper grease anywhere really

pagid ceramic grease is an option, never had a peep out of my brakes and i used cheap pads last time i replaced them http://www.eurocarparts.com/ecp/p/car-accessories/car-maintenance-accessories/maintenance-fluids-and-greases/grease/?526770250&0&cc5_150

is it the y21 or s4c that has no diff? or both :s

Congrats pal, hope you enjoy your new toy just as much

Congrats pal, hope you enjoy your new toy just as much

gutted was enjoying this thread, youll have to make sure you get a thread up in the other project cars sub forum

As requested http://www.ebay.co.uk/itm/231201998498

Yeah for all the worries they did fit in the end I can't see them but they're there as the old ones are in the boot and I can feel them there my brake pedal grips rigght at the top now instead of going like a quater in before gripping on braking performance I couldn't say as I had a stuck caliper at the back so car feels so much better and drives straight now one of the calipers isn't permanently on lol fuel consumption should go down abit aswell was only getting like 20-25 round town :/

I got a two year warranty with the £40 pound ones which is part of the reason why I got a mech to fit them. But when they go I'll rebuild my old ones while there off and swap them for the cheap ones

Yeah I think it was kink who's didn't fit and routed a different way I'll get you a link now they were of eBay and they don't come with sliders just new boots for the old ones, plus out of the 40 I paid 15 of it is surcharge so could get it back if I sent them back to them Dosnt look worth it see how much the postage will cost me I'll keep them and rebuild them as nessasary, I've give the lines to the mech and told him they may not fit but if they fit and there room for my wheels to turn without any pressure on them then to just fit them

Errrrm mini wire tuck?

sorry got mixed up I'm using 5-40 Fuchs oil just over the winter back to 10-40 in the next service

1 on the box One in the pipe same on all pipes though