[MB2 D14A8 by MikeFoto from Poland]

love this car absolutely stunning every thing about it look mint awesome job mate   

[long term project]

With the cam in this car will be a Bseries eater!... Rate the blue tooth thing. Maybe a link for us who have the obd2 setup. I only discovered it myself today. My mate who works for the AA hooked his laptop up and WOW! couldn't believe all the information! This thing has 2 02 sensors...

thanks mate hopping to get cam in soon just waiting for the tool to turn up

it stays with the b18's as it is, eats b16s 

i don't know where to get the blue tooth thing from as it was in the car already but ill try and find out 

its definitely something to get though as it reads every thing almost 

when i fitted the manifold i used it to fault code cheek the engine and wipe the problems away and tell me what vacuum i have 

and find the leaks mad bit of kit to be fair 

 

So good!!

cheers tom appreciate it 

[long term project]

Red calipers?

Bit loud maybe?

its all they had in the shop i wanted yellow 

you can't see them so its not so bad 

just when i went to cleaning the wheels all you see is nasty looking callipers so red it was 

 

 

 

right been a while since i posted any thing on here but theres some updates not a lot but progress is progress 

 

fineally got some wind deflectors deffinately worth there money 

 

got some skunk2 rear lca's and beaks bar 

 

and picked up for only 134 squids an eldbrock performa x manifold was a bitch to fit 

as its was meant for a d16y8 engine and the w4 that i have in mine is very similar but being a 2000 model 

it has air injection and a ridiculous amount of vacuums 

and later found out that the manifold was for a z6 

had to modify my injectors and inlet gasket and a few other bits but its on and works 

and makes a dirrty noise in and out of vtec 

only problem is today i have idle hunt just got to properly blank one of the vacuums 

 

after fitting it me and a mate took it out for a test drive and i went and shaped my drive shaft in the box aswell

so two hours later i have my old gear box back in 

so apart from the crunch in 2nd 3rd and 4th and the idle hunt it goes very well 

 

im also modifying the bumper 

 

thanks all

heres some pics

 

 

 

 

 

 

 

 

 

 

 

 

[C.O.T.M MAY - The winner is Chandler!]

ok im entering rover5 MB4 :D one of the best MB out there  :D

 

cheers mate 

Is it just me or is that grill a bit nasty looking

its gone something else is there now haha 

 

i will eventually update the project thred 

 

craigblight car looks mad evil love it 

[long term project]

Love the last pic mate! Is the lip a slightly different colour?

Yea it's some rover red did look similer when I bought it 

Turns out it's not haha just ain't got round to sorting it yet 

 

Nice! Any news on the engine goodies? 

Not Much on that I need to get the ecu chipped and soceted 

Get the gearbox swapped over 

And I'm moveing soon so hopefully I can start it next month 

But untill then I don't know 

 

Tried to swap the car this morning haha 

I really want a civic ef or wagon 

[long term project]

hi all 

not much to update as things are a little slow at the minute 

 

a massive thanks to nick green don't know his user name on here haha 

got a new gearbox as mine is s**gged 

and the ecu so ow i can get the cam in and running 

 

as for the car the front is as low as the coilovers will allow and i have about an inch left on the rear to go 

wich i will make use of haha

 

i was also looking at the car after cleaning it and got annoyed by the rusty calipers so there painted in

chavtastic red

 

theres alot more coming soon hopefully next month i can get stuck into it 

thanks 

 

 

 

 

 

[Dinochips Project mb6]

Love this car its immense look forword to the updates 

[long term project]

Awesome what data can be read from the ecu??

Manifold pressure?

Intake temp?

it will read almost any thing your ecu reads 

And almost any sensor on the engine / gearbox 

I have to pop out in abit so I'll turn it on and take another of it working 

It's maaad. I forget it's turned on and then get it the car later give it some stick 

And my phone starts shouting at me that it's not up to temp haha 

And to ease off 

 

I just..... want my car to look like yours soooo bad! Just looks absolutely stunning!! 

 

Oh yeah that torque pro looks cool

Cheers mate it slowly coming together 

[long term project]

this is torque pro I didn't have the car running when I took these

Although it works a treat 

 

 

Some more of the car 

 

 

[long term project]

The service wasent too bad they answers all emails straight away 

But I'm not too shure if they couldn't be asled to get it out 

But they said it was due to it Bieng race season lol 

 

I have been going mad the last couple of weeks but then the packege arrived 

And I was 12 again haha 

[long term project]

Thats a sweet looking civic mate nice and tidy,u showing at japfest?

unfortunately i aint going to be able to make it 

 

 

 

good news bisimoto have delivered my parts only took nearly 2 months when they said it would take 7-10 days haha cheers 

 

they are

level 2 na cam 

pro cam gear 

valve springs

and a freebee number plate surround and stickers 

 

ohh and i have cup holders hahaha 

also stage 2 clutch and light waight fly wheel

[CAR OF THE MONTH FEBRUARY 2014 - Hubert's deck is the winner!]

Congratulations mate 

The car is mental 

[long term project]

Vti lip looks right at home there mate good choice!!

cheers mate ill get some better pics of it when my phones charged 

[long term project]

How come you got a obd2 port??? Have our wired one in yourself??

 

 

Apparently some late D series have them beside the centre console.

i think it was because its built in 2000

 im not too shure to be honest 

[long term project]

yeah I remember I always wanted a vtis front lip but I prefer my vti one now, you going to be painting it?

 

eventually will paint it the correct colour just ain't got the time 

VTi lip looks nice, love how clean this is.

Love this colour paint especially in the sun so it get waxed 

Almost every weekend 

[long term project]

Man I love this car! 

 

I quite like the VTi lip on the front and sure does go well with the rest of the VTi-S kit, but of course I would say that...

haha cheers mate i prefer this lip over the vtis one alot less aggresive 

your car is looking good now mate seen the pics you put up from your meet 

looks clean as fook 

[Green&black MA9 d15z3 PL]

very clean 

nice car mate need to lower it abit 

i like the gauges to

[long term project]

cheers all didn't relise there where so many replies sorry 

there is a few things that where going to take place on this car 

original intentions where to swap the engine but then there isnt really alot of difference in 

the d and b engines performance wise ( any thing can be put on paper its how it puts it down )

proven with many races with various cars one bieng a h22 type r witch didnt get too far ahed 

and a type r ep again not a quick as its hyped up 

 

so i have gone a diffrent route and decided to build a all motor D series 

it was going to stay secret till finished but bisimoto have taken the p**s makeing the parts and sending them out 

but hopefully be here soon 

 

 

I thought the car looked familiar! looks well nice! whats the wheels specs?

cheers mate there 16x8 et20 195/45/16 

 

Random observation but is that a obd bluetooth dongle sticking out behind center console in one of your pics? What's that connected too?? And can you use torque pro??

yes it is cool little app too i havent properly set it all up yet though 

and its conected to the obd2 port

 

love the look of this car but just cant take to the rover sticker on back. lol

haha its gone started  to anoy me 

 

Long term project???

Seems like you dont have much left to do!

Beautiful wheels! Loving the 'gearknob' Very original!

Mugen style grille for MB? is that from a EK civic? Didnt know it was a straight fit?

cheers bud

as mentioned nick made it very rare lol 

its not a ek one 

also its long time because i cant save so it takes forever to get stuff

gear knob comes with snap on guarantee too haha 

couple of pics of it now i changed the front lip as the vtis one is abit common now and wanted something more sutle

 

[CAR OF THE MONTH FEBRUARY 2014 - Hubert's deck is the winner!]

Zoy  got my vote mental car 

Loads of effort on that beast 

[CAR OF THE MONTH FEBRUARY 2014 - Hubert's deck is the winner!]

 

ill put forword mine



Still want your grill

 

Haha if I get bored of it again I'll let you know

 

That blue one above is immense 

I want haha 

[CAR OF THE MONTH FEBRUARY 2014 - Hubert's deck is the winner!]

ill put forword mine 

project thred is slow but parts are on the way will make progress on it soon

cheers all

 

 

http://civic5.com/forum/index.php?/topic/7834-long-term-project/   

[long term project]

Cheers all 

I hope to get alot of other bits sorted soon 

 

Roylewaa It was a torx driver  haha 

 

Don't know what it is with me but when cleaning the car 

Every part gets polished and waxed including the engine bay haha bit of a ocd

[long term project]

well this is my project 

its going to be long term but with somthings done i havent seen done on m's before 

here's some pics of it 

so ive added the wheels gear knob and a few other little bits 

once i get the arches properly rolled and abit of camber it will go alot lower 

thanks al hope you like