.jpg.d9cca626aa020ef763b6029e371333a2.jpg)
Sampo657
-
Posts
18 -
Joined
-
Last visited
-
Days Won
2
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by Sampo657
-
-
11 hours ago, KiNK43 said:
Thanks mate
-
2 hours ago, KiNK43 said:
What's the other end connected to
That's the problem. Its not.
I can't find anything that it should be connected too
-
The hose on top of the throttle body
-
Goes in for tuning Friday so will have to be next purchase
-
1
-
-
Nice one. On the topic of gauges. Which pin did you wire your air/ fuel into?
-
Looks pretty good mate. Did you delete the cigarette lighter? My pal has a 3d printer so will have a play with that. Hopefully be able to fit all 3 in there with a bit of fiddleling
-
1
-
-
Evening guys. Looking at mounting 3 x 52mm gauges in the centre console of my Aerodeck. I was wondering what solutions you guys have gone for?
-
2 hours ago, KiNK43 said:
That's right mate.
Spot on. Need to get some more vacuum hose ordered. Have to some how get the p28 ecu to fit my aerodeck next hopefully don't break it
-
2 hours ago, KiNK43 said:
That's fair mate. Did you buy the kit as a complete package?
Yeah mate. Not sure how well it will hold out but I'm sure will do a job. Had to buy few things like injectors, ecu etc
-
51 minutes ago, KiNK43 said:
Looks like it's coming on well.
Not being critical but I'd have saved the cash for the skunk intake and splashed out on a decent exhaust manifold.
I fear that will constantly be cracking.
Looks good tho.
Probably right mate. Was just a cheap eBay kit. If it cracks IL buy again. If it cracks again IL spend more
-
1 hour ago, KiNK43 said:
You need to connect the pcv up. The port on skunk manifold is in the front. Need a longer hose.
Alternatively you can remove the whole black box and use appropriate fittings to vent crankcase into a filtered breather box.
If you are planning on turboing the car you will want some sort of open vent eventually to allow blow by to escape.
Personally I vent the rocker cover and leave the pcv system intact to work in normal driving situations.
Thanks link.
Is it the one with the red bung?
-
Been busy this weekend with these swap outs. Still needing a few bits and tinkering but progress
-
1
-
-
Thanks mate. Bought a ek4 cable and fitted it partially today. Couldn't seem to get the original bracket to fit. So going to look for something to fit. The intake came with a bracket but it's been lengthened. Do you Know what model the bracket would be from?
-
Hi guys. Installing the skunk 2 intake and have came across the crank case breather. Do I need to block it up or leave it open. Red nozzle in picture
-
Ok mate cool. There is a few EKS down the scrap yard near me.. so might steal a cable and just use the original bracket
-
Cheers guys. Do I need to change the brackets for the cable too
-
Sorry if this has been asked before.. I did a quick search and didn't find my answer.
I have a Aerodeck Vti.. I have skunk 2 TB and intake. I understand I may need a throttle cable from a DC2 can anyone confirm this? Thanks
-
Image of engine bay before I purchased the car.
Painted the rocker cover....Before I took it to one of them car washes for a "steam clean" turns out they used a jet wash and got rid of all my hard work and got water in sparks etc...(never again). Haven't taken a picture since the bay has been cleaned and paint removed
Have since removed the a/c unit as was not working and to make room for the turbo.
-
1
-
-
Very tidy mate. Did you get a P28 ecu? Did you need to Dremel the plugs to make them fit into the ecu?
-
It was a lot worse mate. This was probably a year later..
it needed new exhaust and new clutch and the standard cam seal oil leak...but still a bit of a steal.
Will do the cosmetic stuff once I can source good parts for reasonable prices
-
1
-
-
Hi I'm Mark, New to the page. Got this for a steal at £200.
slowly doing bits to her and giving her some much needed TLC
Will be adding a turbo kit to her in the next few weeks.
If anyone is aware of any Pirates black bumpers going please let me know.
Cheers
-
3
-
Fuel filler pipe
in SOS! Help!!
Posted
Hi Gus.
My car has a very strong smell of fuel from the near side rear. Looking at MOT history it shows that the filler pipe is corroded. I cannot seem to locate a replacement. Any ideas? Thanks