Guest thecapsaicinkid Posted November 30, 2010 Share Posted November 30, 2010 Howdy all,My heater has never worked on position 1 and 2 which I understand is the resistor elements failing, recently though it stopped working on all 4 positions. It's not permanent though, this morning it was working as usual.I've checked which fuse I think is for the blowers (no manual) and it's ok, any ideas? Link to comment Share on other sites More sharing options...
civicturbo79 Posted December 1, 2010 Share Posted December 1, 2010 bushes warn out on the fan blower motor ( need a new one or a good second hand one ) and the resistor for the 1 and 2 postions not working , Rich. Link to comment Share on other sites More sharing options...
Touge_battle Posted December 22, 2010 Share Posted December 22, 2010 bushes warn out on the fan blower motor ( need a new one or a good second hand one ) and the resistor for the 1 and 2 postions not working , Rich.sounds just about right,very good Link to comment Share on other sites More sharing options...
southwestmb6 Posted December 22, 2010 Share Posted December 22, 2010 Mine has the same problem and it was the brushes in the motor.Cleaning them up lasts afor a little while , but only a temp fix. Link to comment Share on other sites More sharing options...
southwestmb6 Posted February 23, 2011 Share Posted February 23, 2011 My brushes are now dead !!!!!!!!!!!!!Anyone help please let me know . Regards Mike. Link to comment Share on other sites More sharing options...
johngreen537 Posted February 23, 2011 Share Posted February 23, 2011 lol mate, there's someone breaking a VTI on here now... thats your best bet viewtopic.php?f=31&t=5724&p=55208&hilit=breaking#p54952 Link to comment Share on other sites More sharing options...
southwestmb6 Posted March 2, 2011 Share Posted March 2, 2011 lol mate, there's someone breaking a VTI on here now... thats your best bet viewtopic.php?f=31&t=5724&p=55208&hilit=breaking#p54952Picking motor up weekend . 1"£££$££"!! Link to comment Share on other sites More sharing options...
Kenobi Posted March 2, 2011 Share Posted March 2, 2011 I have no heat really. Link to comment Share on other sites More sharing options...
johngreen537 Posted March 2, 2011 Share Posted March 2, 2011 lol thermostat again Seems the hard winter has killed a few this year, including mine Link to comment Share on other sites More sharing options...
Emin89 Posted October 19, 2012 Share Posted October 19, 2012 Good Day to all,I have the problem that my blower motor starts spinning only at the (III) and (IV) position, I took the blower motor regulator out and I saw three springs connected to a plate, my question is, can you repair it? Has someone done it (solder.etc)? Just want to try something constructive, before I spend €35 for a ridiculously simple device.I would be very grateful for some tips.Emin. M Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.