Guest Posted February 6, 2011 Share Posted February 6, 2011 iabs are activated by the chip as you have to have it set on the chip. Link to comment Share on other sites More sharing options...
digitalfaze Posted February 6, 2011 Author Share Posted February 6, 2011 who chipped it and who done the map?contact scott at h-tune in dumfries and buy a chip with your requirements onhe will do what you want, iabs are not activated by the chip, they are activated by the pins being bridged on the ecu on a p28/p30get a teg si basemap with the vtec point moved up to 5k and the rev limit lifted to 8650...you will notice a massive difference in your vti-s after thisthats who i bought the ecu and chip from, it just makes my car run worse, i bridged the pins on the ecu and they didnt work so i checked the solders and then re soldered it and still no luckharsh acceleration it stutters like its out of fuel and no iabs, vtec was set at 5600rpm but get a flat spot as soon as vtec kicks in, it did feel like it wanted to move a bit better though but and could be fun if it all worked Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.