spudley1988 Posted May 21, 2012 Share Posted May 21, 2012 Howdy again chappies, was just looking on a little helpful advice please. I currently have the MB3 and have recently been given a D16 head from a generous mate. The heads off a crx del sol. Now the guy that was going to fit my head was wandering that instead of changing the whole head, would it be possible to just change the cam and the vtec solonoid over??cheers Quote Link to comment Share on other sites More sharing options...
EmZvr Posted May 21, 2012 Share Posted May 21, 2012 Due to my bad english it will be difficult to explain but you can insert the D16y8 camshaft D16y8 "bridge". It's better than just changing the head If you just swap the head you will lower the compression and the effect will be lower. I'm really interested to see the result of the mini-me please share some results after the build is ready. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.