Hop78 Posted September 10, 2013 Share Posted September 10, 2013 I need to repin an Iacv after an engine swap from d14z4 to d16y2 it's obd2a with an conversation harness to obd1. I've hard wired the vtec which is working, but I'm getting an error code 14 IAC (EACV) - idle air control valve. The iacv has been swapped to a two wire one and I presume it needs repining on the harness, but I don't know which I don't know which pin to move to from the obd2a harness to the obd1 harness? Any help would be appreciated as this is really starting to pee me off now 😡Cheers Quote Link to comment Share on other sites More sharing options...
crazyrob9999 Posted October 3, 2013 Share Posted October 3, 2013 If you find out on this could you let me know got exact same problem put a b16 in mine and it won't idle and have same code Quote Link to comment Share on other sites More sharing options...
Hop78 Posted October 3, 2013 Author Share Posted October 3, 2013 I ended up stripping the iacv and fitv off and cleaned them with carb cleaner along with the throttle body, also the wires were the wrong way round on the iacv plug and I had to run a new wire from the iacv to the ecu, this sorted the problem out, hope this helps sort you out, I've figured out it pointless asking for any help on here for anything apart from what wheels or spoiler to put on! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.