vti_786 Posted February 15, 2010 Share Posted February 15, 2010 hi guys, need some advise, would these springs fit the mb6?http://cgi.ebay.co.uk/honda-civic-cobra ... 35a726adb1i know its not recommended to use on standard shockers but money is tight at the moment and want to drop the car a bit, let me know guys 1"£££$££" Link to comment Share on other sites More sharing options...
stoocake Posted February 17, 2010 Share Posted February 17, 2010 As I always say, if you're on a budget, don't do it. I can appreciate you want the car to look lower, but in every other respect if you do it cheaply, it'll be worse off. The handling is the MB's weak point - don't make it any worse! Link to comment Share on other sites More sharing options...
vti_786 Posted February 17, 2010 Author Share Posted February 17, 2010 good advice there mate, you wouldn't know if integra type r (dc2) suspension will fit will it?someone on ebay has told me the fronts fit fine, but you need the lower control arms off the dc2 to fit the rear shocks and springs, is this correct? Link to comment Share on other sites More sharing options...
stoocake Posted February 17, 2010 Share Posted February 17, 2010 As discussed in PMs, ITR suspension will fit but if you get eye type rear shocks, you will need eye type LCAs as well. Doesn't make the job much longer to fit the LCAs as it's only a couple of extra bolts per side (albeit they'll be very hard to get off). Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.