Bri
-
Posts
135 -
Joined
-
Last visited
Content Type
Store
Calendar
Forums
Gallery
Downloads
Everything posted by Bri
-
Geo/toe not sure? Setting on the meister r's is at number 8 front and rear. MB6 Vtis. Not sure how much it's lowered, as car never had standard shocks since I got it. At the moment, the distance from the top of the wheel arch to the ground is about 595mm for the rear and 605 front, I have a set of 16's with 195/45/16. Hope this helps!
-
Didn'y know this, my fuel gauge goes down when ignition is turned off?? Any suggestions why? Cheers.
-
Understand! What can you do to minimise understeer, besides what ye suggested? Cheers.
-
What would be a main cause for understeer. I have meister r's on, all else id standard!
-
So if I got a manifold =2.5 inch would this fit onto standard exhaust?
-
Can anyone recommend where to get a shortshifter for the MB6? Tks.
-
Cheers for the info, will keep a look out for one.
-
Cheers for the info, what bushings would I need, if any? for the arb.
-
Ye the black rubber bumper strip accross the front bumber, mine is starting to crack?
-
Ae these easy to replace? Cheers.
-
If I was getting the arb and side lights or other parts, from the MG 180 or Rover 45, what year do I need to look for on the MG or 45? Thanks?
-
Tks for the info on that, was looking at getting a j's racing manifold. But too big!
-
Can anyone tell me if the standard manifold outlet on an MB6 is 2.5 inches? Tks.
-
Cheers mate.
-
My Rear registration surround on the outside id loose, how can I tighten this up? Cheers.
-
Has anyone got one of these put in, if so, what and where did you get it. Is there much difference? Cheers.
-
I was going to attempt to replace it myself and then bring it to a garage and regas it, maybe better to just get the garage to replace and regas the system!
-
Any idea where I'd get a nice cheap one?
-
Hi Guys, My ac compressor was knackered, so got a replacement. Are these easy to change? Cheers.
-
Cheers for the info, I have meister r's on the car and have about 600mm from wheel arch to the ground on the rear, this is with 15's on at the moment. I have the rear coilovers at their highest, this is why I'm not sure to get 15's or 16's??? If their goint to be flush, I think I'll take your advice and go up about 5. Cheers Mate.
-
The 16's I'm looking at getting are: http://www.eastcoastalloys.com/alloys/search STR 414 BFP STR RSGT ANT Tyres would be 195/45/16 Falcon's Both of them have an ET 40 Do you think these would be ok?
-
Would the dc2 strut brace fit the MB6?
-
Would 16's with 40 offset be better? Also on the site it says that the offset should be 55?? Is this right. Cheers.
-
Hi Looking at getting these: http://www.redpowermotorsport.ie/produc ... cts_id=101 is 35 offset too low? Not sure, any help!
-
Cheers for the info!