Jump to content

noodels

Civic5 Supporter
  • Posts

    4,657
  • Joined

  • Last visited

  • Days Won

    24

Everything posted by noodels

  1. that would be my concern tig would be the coolest method ,but drill and screw/rivets=no heat
  2. that would be my concern tig would be the coolest method ,but drill and screw/rivets=no heat
  3. think pop rivet it back would be better if you doing it that is edit-- then again would be a problem to drill s/steel
  4. think pop rivet it back would be better if you doing it that is edit-- then again would be a problem to drill s/steel
  5. here one in red viewtopic.php?f=141&t=9673
  6. here one in red viewtopic.php?f=141&t=9673
  7. loads peeps doin turbo b18c4 ITR/EK9 nowerdays and with s9b box nice thought
  8. loads peeps doin turbo b18c4 ITR/EK9 nowerdays and with s9b box nice thought
  9. just one note, the bolts in the wrong way round though ,doubt will come loose
  10. just one note, the bolts in the wrong way round though ,doubt will come loose
  11. nearly bought them front cambers didnt look adjustable
  12. nearly bought them front cambers didnt look adjustable
  13. bolt may have been spaced out,looks fine though viewtopic.php?f=88&t=420
  14. bolt may have been spaced out,looks fine though viewtopic.php?f=88&t=420
  15. nice"n" clean example put it on the members aerodecks post
  16. nice"n" clean example put it on the members aerodecks post
  17. says you need to bridge ecu as it will show codes ect
  18. says you need to bridge ecu as it will show codes ect
  19. No adviseries straight swaps no airbag probs
×
×
  • Create New...