JasonV

HI Dave, Thankyou for the advice i found the order in my haynes manual it is indeed right hand drive what is the pedal suppose to feel like when the engine is running is it suppose to have a small amount of play and it be rock solid or is it suppose to press down a fair amount and then be solid ?

hi guys had my civic go for its MOT last saturday and it failed on reserve brake pedal movement in other words the brake pedal goes straight to the floor when i push on it now i've bled the system in the correct order RR FL RL FR with the engine off the pedal is solid as it should be when the engine is off i have also changed the master cylinder and the servo to try and eliminate to see if that was the issue but still goes down to the floor when the engine is running i have checked for leaks all along the system and cannot find a single leak anywhere any ideas guys because its got its retest this friday and i really want to get her back on the road !

hi guys had my civic go for its MOT last saturday and it failed on reserve brake pedal movement in other words the brake pedal goes straight to the floor when i push on it now i've bled the system in the correct order RR FL RL FR with the engine off the pedal is solid as it should be when the engine is off i have also changed the master cylinder and the servo to try and eliminate to see if that was the issue but still goes down to the floor when the engine is running i have checked for leaks all along the system and cannot find a single leak anywhere any ideas guys because its got its retest this friday and i really want to get her back on the road !

hey guys long time ! does anyone sell mapped ecu's that will work on my 1.4 mb to give it a little bit more umph?

hey guys hope everyone is okay ive checked to see if the bolt thread is holding the bell housing in place is not so i think its just ceased in place and me and a friend have tried to get it removed even with a bit of brute force but it still wont move ! anybody fancy coming to mine one of the days i live about 30 mins from birmingham and has removed a clutch off their MB before any help or suggestions are always appreciated !

Hey guys i need some help with changing my clutch myself i have got to the point where all the bolts are out but unfortunately one of them snapped in the starter motor holes so part of the Thread is still inside! Will this affect taking the bell housing off so i can replace the clutch? any guides or suggestions welcome Or if any of you guys are local to me (kidderminster) maybe you could give me a hand one day Many thanks jasonV