baz_ctr

yeah I will don't know must about MB civic any other civic or integra and know affair bit would the dc2 itr bar fit I am already running itr lca's have one there with all brackets if I could mate it to the chassis

right some going to be looking for the roll bar and all brackets & mountings (as we have nothing there for the roll bar to be fitted too) plus the little under brace too anybody got them and willing to send to Dublin,Ireland

thanks for that haven't been at the car in while with trackdays finishing up but going to go looking for this over new few weeks thanks again

You don't have photo of standard arb fitted to mb so I can see where it is mounted because where the arb is mounted on other model civic's and integra's is where I expected it to be and there's where I looked

So after the first trackday it was starting to over heat after 3 laps don't know if it was an air lock in system or what but we bleed it on the day and refill didn't overheat after that but it was raing heavy so maybe that was it no taking any chances so we needed bigger rad so have just picked up this dc2 integra type r one should help with the colling getting pipes to fit both the block and rad will be challenge but we will see what we can do about it

They are used over here on trackdays usually the MB6 vti or vti-s,

We used the base of the original seat still alot lighter on the new seats

Yeah there are 4 of us to keep costs low for all of us and keep the build going with the extra pair's of hands but we are already look at bring in second car later next year once the funds are there

Yeah had the car up on car lift and had good look no mounting points on chassis which we thought was very strange, also we are now running dc2 eye type rear lca because we are running type r suspension, it also has crazy oversteer in the wet mid corner

Hi is looks now at our first trackday with it last thursday Spec to date: most of the interior removed DC2 Type R suspension with H&R lowering springs DC2 Type R magnaflow exhaust system Skunk2 inlet manifold Vti Fat Fives on Hakook Rs2's Rage semi bucket seats Sparco harnesses Hks panel filter with cold air feed Prelude 282mm calipers with slotted discs

Hi Guys starting this project abit late in the build so not alot of photos, this is our budget track car this car will be must about chassis handling before we move on to power lets just say we have a cash iron D-series turbo mani, turbo and intercooler sitting there plus spare D15B Block and gearbox lol this car is never going to be pretty cosmetically so show and shiners look away lol anyway handling and stopping is the order of the day for now here it is when we got it

Hi Guys new on here hi to you all we have a MB1 1997 1.6 we are setting up for trackdays upgraded part we think required for doing trackdays but when we came to putting a rear arb bar on ( as it haven't got one) there are no mounting points on chassis for it and also what rear arb would you use mgzs? all replies appreciated cheers