EMP

Thanks for the offer but i dont need it. Took it apart, soldered, and its now good to go! You can see in the picture below why it didnt work. Thanks again for the help.

Hi, and thanks again for the replys! Continuity tested the button and bam! No continuity! Jumped the contact with a little bit of wire, turned the lights on and the fogs worked flawless!

Thanks for the reply! "Are you deffo getting power at the plugs that go into the fog lights?" If deffo means sure/positive/certain then no. I get no power at the two plugs that connects to the fogs at the front. If you mean the plug behind the button by the cluster then yes! I Will search for the two relays tomorrow. Wish me luck.

Hi there lads! Today i got my new "ring" fog lights i ordered from ebay, i read about changing the oems out in i diy i found here. I went straight to the garage, removed the old beaten ones, (They have never worked since i bought the car and the rust had eaten them) installed the new ones but then the fun ended... When i press the button for front fog lights the button light does not come on. I have checked the fuse, its ok. I have checked the ground to the fogs, its ok. I have checked both front wiring thru the contact and i get 0v. The rear fog are working, and the light on the button comes on, and i can find and hear the relay for it. When i read the WSM for the mc2 only the rear light relay is pictured, when i check the fuse layout it says "Front fog lights (Via front fog light realy)" But i cant find the relay (There is one right? ) for the front fogs.. First post btw!