EMP
-
Posts
0 -
Joined
-
Last visited
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by EMP
-
-
Hi, and thanks again for the replys!
Continuity tested the button and bam! No continuity!
Jumped the contact with a little bit of wire, turned the lights on and the fogs worked flawless!
- 1
-
Thanks for the reply!
"Are you deffo getting power at the plugs that go into the fog lights?"
If deffo means sure/positive/certain then no. I get no power at the two plugs that connects to the fogs at the front.
If you mean the plug behind the button by the cluster then yes!
I Will search for the two relays tomorrow. Wish me luck.
-
Hi there lads!
Today i got my new "ring" fog lights i ordered from ebay, i read about changing the oems out in i diy i found here.I went straight to the garage, removed the old beaten ones, (They have never worked since i bought the car and the rust had eaten them) installed the new ones but then the fun ended...
When i press the button for front fog lights the button light does not come on.
I have checked the fuse, its ok.
I have checked the ground to the fogs, its ok.I have checked both front wiring thru the contact and i get 0v.
The rear fog are working, and the light on the button comes on, and i can find and hear the relay for it.
When i read the WSM for the mc2 only the rear light relay is pictured, when i check the fuse layout it says "Front fog lights (Via front fog light realy)"
But i cant find the relay (There is one right? ) for the front fogs..First post btw!
MC2 Fog lights not working. Relay?
in SOS! Help!!
Posted
Thanks for the offer but i dont need it.
Took it apart, soldered, and its now good to go!
You can see in the picture below why it didnt work. Thanks again for the help.