[Please help , very confused.]

Definitely looks like I'm saving for Meister's then , thanks for the shout 

[Please help , very confused.]

I didn't make myself very clear did I haha.

 

I know about coilies adjustable heights.

 

What I need is a set that are adjustable from standard ish height and lower I don't want a set that at their maximum only reach the height of a 30-40 mm drop but will drop down to 110-120 mm 

 

[Please help , very confused.]

Need some help , I understand my aerodeck currently sits upon the mg zs suspension setup , however I want to replace but not lose the ride height , will a coilover set provide me with at least this ride height (with a firmer setup) or am I going to need to look elsewhere ?

 

I know it sounds silly but im confused.

[Cannot resist modifying]

4 hours ago, snakey135 said:

The twin loop looks decent... And I'm a fan of the camo of the wing, it looks smart! I think the rear boot trim and dash trim in the camo will tie it all in nicely!  

That's what I am hoping , I don't want too much but I don't want too little either.

 

[Cannot resist modifying]

I will get pics etc up as soon as possible , not able to get exhaust on to day or the tow bar off , ah well maybe later in the week 

[Cannot resist modifying]

I'm removing the tow bar tonight and I am hoping that this back box's dimensions allow it to fit (its slightly smaller than the mugen one)

[Cannot resist modifying]

So it looks like the new exhaust will be going on today , hopefully sounds good.

 

[Cannot resist modifying]

Ta very much

[Cannot resist modifying]

May have also bought something completely against my original plan.

 

Original plan was a simple 2/2.5 inch exit rear box , then I found this .... Think the exit is 3.5 or something ( I don't read German)

 

Ah well

[Cannot resist modifying]

At the moment this is a test , its very rough , any closer than 6ft and all the faults show out.

I'm planning to redo this wing and then do the rear plate recess and the interior centre console or just the dash garnish.

Considered the wing mirrors but shmeh.

Thanks for the good shout though folks.

 

[Cannot resist modifying]

Ta very much , this is the closest I can get haha , any closer and the faults show up

Was a rough draft with a lot of wind on the front garden , but I'm happy enough 

[Cannot resist modifying]

So figured I'd start a thread , the car was sitting on the drive over the weekend staring at me..... So me n the wife got bored and did the wing.

 

This is (I can feel it already) the start of what I feel is going to be a never ending list of stuff to do.

 

**additional**

 

Just got heavily scorned because I didn't acknowledge my wife's wonderful work of the front grille area.

(I don't have a pic of it ATM)

[New member , old car]

Folding table? What? 

I need this.

The auto , ummm I cannot pass judgement on as I drove the new Subaru levorg the other day that only comes in auto and actually loved it. :/

[New member , old car]

Ah , the crv ain't that bad , I saw one with a turbo k24 lump dropped in the front a little while back (I don't know how much work went into it for a start).

Scared me s**tless.

[New member , old car]

That sucks ! Was the crv a replacement based on practicality? (As if you can find much more space than the aerodeck)

Or comfort.

A few I have rode in are very comfortable.

[New member , old car]

Ahahahahahahahahahahahahahaha , she's a strong old girl at 200000+ , me n the wife love it.

I promise I will take care of her.

I am officially addicted too the car.

[New member , old car]

Hi all , new member , bought a VTI recently and the wife and I love it , I believe it's a previous members car.

Would love to get in touch with them , I like knowing a cars history and chatting to like minded fans.

Reg is X298GLE