[mg zs steering wheel]

the stalks are the same didn't  change that just the  AirBag Slip Ring / Squib

honda                                                  mg

my honda steering wheel badly worn and i had a spare mg and i saw a few people was asking about it so fort might as well give it a go.

it slightly smaller feel nice to drive with and it soon have a red and carbon honda badge

[mg zs steering wheel]

when getting the steering wheel grab the airbag/horn ring with all wires and the 4 screws for ring 

                                                                       pink wire and white wire are not needed.          green wire is horn .            red/yellow wire and red wire are for airbag

before staring disconnect battery    

t30 star key to take airbag off  unplug airbag and horn and earth wire make shore steering wheel straight 19 mm socket to undo center nut  and take column cover off 3 philips screws 

 then there 3 philp screws  holding on airbag/horn ring on                                                

honda horn wire is red join to mg green wire  airbag honda yellow wire to mg red wire and honda green wire to mg red/yellow wire 

do not solder with airbag plugged in as the heat can set it off 

put mg airbag ring on column screw 4 philips in.  plug wire in. put column cover back on. put steering wheel on. plug airbag and horn in 

all in and working and srs airbag light is off but dont no if it will work in a crash and i'm not gonna crash it to test that part 

this is a guide so you will bee doing this at your own risk 

[shaun mc1 aerodeck]

the mg had better looking and a fresh new look dash so i swapped that as well 

 

 

  

 

 

[shaun mc1 aerodeck]

as you can see i had loads of fun snap 3 bolt but got all i need so all good 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

got shocker and all arms and rear antiroll bar gonna clean it all up and poly bush it at some point 

[shaun mc1 aerodeck]

fix driveshaft as well got new one from r and j for £25 done 2000 mile on it still going strong 

and got mg hairpin alloy on with 195 50 16 tyre on 

 

this weekend im picking up a mg zs 1.6 striping all suspension part off it il try get some good pic  

[shaun mc1 aerodeck]

work i done on the first week of owning car new front caliper and painted

 

fixing  door lock

 

put my rover 400 alloy on look better that the 13" still wheels 

painted grill black