weetec Posted May 31, 2010 Share Posted May 31, 2010 hi, i wanted to know if a itr ecu would plug n run in a mb6?. or can it be socketed and re-mapped to run in my mb6? the reason for asking is i have been priced for a hondata s300 approximately £800 all work done. basically i am trying to keep costs low as i can obtain a itr ecu from an import teg. i am not really interested in all the s300 has to offer. all i want to gain is the extra bhp from the mods i have done to my car...any help? naz Link to comment Share on other sites More sharing options...
civicturbo79 Posted May 31, 2010 Share Posted May 31, 2010 I would just get a p28 or pr4 ecu £100 and fit chrome (almost the same as s300 ) £100 and get it mapped £300 . Rich. Link to comment Share on other sites More sharing options...
weetec Posted May 31, 2010 Author Share Posted May 31, 2010 i will look into this as it definetly sounds cheaper, thank you rich. Link to comment Share on other sites More sharing options...
tontvti Posted June 1, 2010 Share Posted June 1, 2010 I've got a P75 ecu modified to run IABs and vtec along with Neptune RTP licence and emulator. It is set up like a P72 for the ITR so a few pins may need swapping for the IABs but whoever is tuning it for you should be able to do that.I never got round to using it or really modifying the car, I just trimmed the A plug and started the car to check it worked.http://www.hrtuning.com/£280 shipped if you want it. It cost me over £400 to get it here from the states, stupid import duties.... Link to comment Share on other sites More sharing options...
weetec Posted June 3, 2010 Author Share Posted June 3, 2010 will let you know matey 1"£££$££"! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.