beaniexx Posted October 13, 2010 Share Posted October 13, 2010 hi all just a quick one as a little unsure.well i have the b18 c4 but im running teg cams and retainer springs and my question is i am gona do my valve clearances so do i just set them as if its original cams or use the settings from the integra type r?thanks in advance Link to comment Share on other sites More sharing options...
johngreen537 Posted October 14, 2010 Share Posted October 14, 2010 They are the same mate! All the DOHC engines use the same spec clearances!INTAKE - 0.15~0.19mm EXHAUST - 0.17~0.21mm Set it bang in the middle though, just to be on the safe side! Link to comment Share on other sites More sharing options...
poolster Posted October 14, 2010 Share Posted October 14, 2010 good luck gettin them bang in the middle,there a pain in the bum to get right.i set mine in the middleish and my intake side was a bit rattly so i went back in and set them at about 0.15 to 0.16mm.spot on now and feels more powerful.as long as your not below 0.15 youl be fine Link to comment Share on other sites More sharing options...
james Posted October 14, 2010 Share Posted October 14, 2010 you need the right tools or els it will drive you up the walls Link to comment Share on other sites More sharing options...
johngreen537 Posted October 14, 2010 Share Posted October 14, 2010 LOL, I just heated a 10mm ring spanner and put a 90 degree ish bend right at the end, no need to buy special tools then Link to comment Share on other sites More sharing options...
james Posted October 14, 2010 Share Posted October 14, 2010 i done the exact same thing and its still a pain in the stake rump!!!! Link to comment Share on other sites More sharing options...
johngreen537 Posted October 14, 2010 Share Posted October 14, 2010 lol, never said it was easy, but cheaper than 'special' tools Link to comment Share on other sites More sharing options...
beaniexx Posted October 14, 2010 Author Share Posted October 14, 2010 cheers all thats the answer im looking for.yeah tell me about it i done my atr vc and what a bitch but wow what a diference.thanks peeps Link to comment Share on other sites More sharing options...
johngreen537 Posted October 14, 2010 Share Posted October 14, 2010 anytime Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.