turbothis Posted December 2, 2010 Share Posted December 2, 2010 hi, i am intalling a vtec controller and i cannot find the wire for the vtec pressure switch/vtm. iv checked a few pinouts of the ecu but the keep pointing to pin 6 in connector "D" but there isnt a wire there. can anyone shed some light on this? thanks Alex Link to comment Share on other sites More sharing options...
civicturbo79 Posted December 2, 2010 Share Posted December 2, 2010 the mb6 ecu pinout is not the same as any other honda ecu the vtec wire is green with a yellow strip connector A number 8 slot ( connector A top row 8 from the left )Rich. Link to comment Share on other sites More sharing options...
johngreen537 Posted December 2, 2010 Share Posted December 2, 2010 The how to for installing VTEC light shows location on a picture mate! Link to comment Share on other sites More sharing options...
turbothis Posted December 2, 2010 Author Share Posted December 2, 2010 thanks i will have a look Link to comment Share on other sites More sharing options...
bepilot Posted December 3, 2010 Share Posted December 3, 2010 i've posted up some of the info in a video I uploaded to youtube, check the comments box... it's the number 15 of the A connector you'll need Link to comment Share on other sites More sharing options...
turbothis Posted December 3, 2010 Author Share Posted December 3, 2010 on my connecter "A" pin 15 is a red wire. Link to comment Share on other sites More sharing options...
johngreen537 Posted December 3, 2010 Share Posted December 3, 2010 The yellow/green wire, shown in this pic going into the scotch lock.... Link to comment Share on other sites More sharing options...
bepilot Posted December 3, 2010 Share Posted December 3, 2010 on my connecter "A" pin 15 is a red wire. pin 15 on B is red indeed...letter A connector please It's the one with the most pins (is that clearer perhaps?) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.