JaredMac Posted February 23, 2011 Share Posted February 23, 2011 Since my coilovers are getting fitted this weekend, I've spent the afternoon shopping around for some other goodies for the car. I was looking for a rear lower tie bar for my MB6 and it seems a bit hard to come by (if they are even made for the MB6), has anyone managed to get one? Also, When I was stripping a few parts off my Coupe I took my front and rear upper strut braces up and held them up to the top of the struts on my mate's 1.6 MB, I remember that the front definitely fitted onto the MB but Iseem to remember the rear fitting as well, can anyone confirm this?? Link to comment Share on other sites More sharing options...
johngreen537 Posted February 23, 2011 Share Posted February 23, 2011 MB6 has one standard mate!If yours hasn't :viewtopic.php?f=31&t=5724&p=55208&hilit=breaking#p54952 Link to comment Share on other sites More sharing options...
bepilot Posted February 23, 2011 Share Posted February 23, 2011 as johngreen says it...as for the rear upper one, it should fit but you'll need to redrill the bar as the damper attachment points are offset on our chassis... Link to comment Share on other sites More sharing options...
johngreen537 Posted February 26, 2011 Share Posted February 26, 2011 EG/EK ones work, just needs the minor working to the mounting holes as bepilot said Link to comment Share on other sites More sharing options...
the mad kiwi Posted February 27, 2011 Share Posted February 27, 2011 my lower one had died or the bolts broke when i went siliding on snow and hit something backwards(i caint remember) will the lower ones fit? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.