Guest Posted July 23, 2011 Share Posted July 23, 2011 I need to remove the front half of the headlining to locate a leak.I don't want to snap anything so can anyone please tell me how to remove the unit in the centre that has the light and remote receiver ball etc in it?Also are the trims on the inside of the front pillars difficult to remove?Thanks Link to comment Share on other sites More sharing options...
Errordeck Posted July 25, 2011 Share Posted July 25, 2011 download a workshop manual, handy for lots of other things as well! Link to comment Share on other sites More sharing options...
Guest Posted July 25, 2011 Share Posted July 25, 2011 It won't let me download them? Link to comment Share on other sites More sharing options...
Errordeck Posted July 28, 2011 Share Posted July 28, 2011 here you go:http://downloads.hondatech.info/Auto/Ma ... Manual.zip Link to comment Share on other sites More sharing options...
Guest Posted August 4, 2011 Share Posted August 4, 2011 Thanks Link to comment Share on other sites More sharing options...
ryan.. Posted August 4, 2011 Share Posted August 4, 2011 its very easy. Tiny flat blade screw driver and prise out the light cover. Next remove the 2 bolts that you uncover and now you can remove the entire unit ( rembmer to unplug it from the loom as you remove it) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.