rad1 Posted February 21, 2012 Share Posted February 21, 2012 Hi i've been having vibration noises at the front of my mb6 vti-s for about 2yrs now and is getting worse and louder...recently had front arb links changed, made a massive difference to the handling but not for the noise any ideas anyone?Over rough road gets louder also the faster i drive like on the motorway. My car has mg zs 180 suspension all round changed top wishbone arms last year and tie rod ends about 3yrs before. Quote Link to comment Share on other sites More sharing options...
leejt1979 Posted February 21, 2012 Share Posted February 21, 2012 Driveshaft?? Quote Link to comment Share on other sites More sharing options...
rad1 Posted February 21, 2012 Author Share Posted February 21, 2012 Can driveshafts make vibrating noises? The boots seem fine on them...vibration comes from both sides and the centre near footwell! Can worn deep bushes on the front arb cause this noise? Quote Link to comment Share on other sites More sharing options...
Vtec-mb6 Posted April 6, 2012 Share Posted April 6, 2012 i replaced my driveshafts..and still same problem..i dnt av a clue as to wat it is yet myself Quote Link to comment Share on other sites More sharing options...
Vtec-mb6 Posted April 6, 2012 Share Posted April 6, 2012 i replaced my driveshafts..and still same problem..i dnt av a clue as to wat it is yet myself Quote Link to comment Share on other sites More sharing options...
civicturbo79 Posted April 8, 2012 Share Posted April 8, 2012 This of thing is always hard without driving the car or hearing the noise , i would go for the long drive shaft inner half shaft the extension part from the box to the shaft that has a bearing on it and the can fail . Rich. Quote Link to comment Share on other sites More sharing options...
civicturbo79 Posted April 8, 2012 Share Posted April 8, 2012 This of thing is always hard without driving the car or hearing the noise , i would go for the long drive shaft inner half shaft the extension part from the box to the shaft that has a bearing on it and the can fail . Rich. Quote Link to comment Share on other sites More sharing options...
Nabil83 Posted April 8, 2012 Share Posted April 8, 2012 but handbrake on and try and and move the car slowly if u hear a loud click there's a good chance it could be the drive shaft (gearbox end), if it happens u find out it is change it asap otherwise the problem might get to ur gearbox Quote Link to comment Share on other sites More sharing options...
Nabil83 Posted April 8, 2012 Share Posted April 8, 2012 but handbrake on and try and and move the car slowly if u hear a loud click there's a good chance it could be the drive shaft (gearbox end), if it happens u find out it is change it asap otherwise the problem might get to ur gearbox Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.