Jump to content

Help needed in mb9!! I don't really know what's happening


syncronix
 Share

Recommended Posts

Sometimes the engine fault light appears for 0.5 second, the engine kind of stops during that time (when the light is on) and then continues to run like nothing ever happened, no wired sounds from the engine... nothing. That happened around 10 times since I own the car (july 2011) I asked people about that and everybody told me there was nothing to worry about beacause that could be gases or the poor quality fuel.

The last time the same thing happened but the engine fault light kept on and the engine stoped, I stoped the car turned off the key, imediately after turned on the key and the car worked as nothing ever happened. The mecanics are telling me it might be the distributor or the catalisor sensor that is giving wrong information.

If somebody knows anything about this please tell me about it!! thank you

(i already tested the centralin and no faults were detected, made the reset and it showed the same, no engine faults detected)

Link to comment
Share on other sites

quote::::That happened around 10 times since I own the car (july 2011) dont worry about it ;)

maybe dirty gas in inlet plenum and throttle body it confuses O2 sensor and may show a code ect..

dont worry about it, and try running car on idle for 10-20 seconds b4 switching engine off ect :|

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...