joelufc20 Posted March 8, 2012 Share Posted March 8, 2012 anyone replaced the friction plate on a 1.4 civic. is it hard to do/ does the engine have to come out or has anyobne got a howtoo Quote Link to comment Share on other sites More sharing options...
knight Posted March 8, 2012 Share Posted March 8, 2012 Is gearbox off job! Quote Link to comment Share on other sites More sharing options...
Guest Posted March 8, 2012 Share Posted March 8, 2012 And drive shafts out oooooooooooosssssssssshhhhh! crap job did my vti last october in the freezing cold wasnt fun good luck though if you have the cash get it done buy a pro i had mine up on my mates ramp in his garage hard to do on axle stands. Quote Link to comment Share on other sites More sharing options...
mantior Posted March 8, 2012 Share Posted March 8, 2012 First time you do it it can be a bit daunting, but as front wheel drive cars go it's relatively easy.No intermediate bearing on the nearside driveshaft on SOHC Civics either IIRC so even better. Gearboxes on these are light and fairly easy to handle on your own, which is normally the biggest headache (literally, potentially). But if you're not confident I'd probably give it to a garage to do. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.