Shaddow Posted April 22, 2012 Share Posted April 22, 2012 Hi all,Sorry if this has been asked before, but could not really find the right answer after a search. My ABS light has been coming on intermittently over the last few weeks and I want to get it sorted. My best solution I thought was to get an OBD reader. (This will also allow me to use the sensor on future cars and find future problems).From what I can see most OBD sensors come with what looks like a 16bin (Double row) connector. However as I have a MB6, the diagnostic cables are a 5 pin and 2 (or3) pin on 2 seperate harnesses.What connector do I need to use a standard OBD2 (or1) reader? I have read the MB6 comes with an OBD2 ecu with OBD1 harnesses. I have done a quick serch on Fleabay regarding obd1 to obd2 harnesses, but seem to be a ECU swap harness and not fault code reader harness.Any help is much appreciated.Regards Quote Link to comment Share on other sites More sharing options...
nadvti Posted May 11, 2012 Share Posted May 11, 2012 under the dash Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.