Mc Matthew 2 Posted April 25, 2012 Share Posted April 25, 2012 Hello to everyone.New to the site so still finding my way round. Was hoping to find some info about changing the rear torque mount on my MC2 1.8Vti. I've already had a look at getting it off I got very close but couldn't get at the 2 bolts on the back of the mount. UNdid the bracket that attaches the mount to the engine but couldn't get it out of the way. I've had a read round and a lot of you seem to have ended up at this point has anyone actually managed to get into this and get it swapped.Please help I'm not sure I can take the bounce when changing gear at low speeds for much longer!!!Thanks in advance for the help Quote Link to comment Share on other sites More sharing options...
Moe Posted April 25, 2012 Share Posted April 25, 2012 undo the front 2 torque mounts, swing engine forwards to get some extra space. its very tight but can be done! Quote Link to comment Share on other sites More sharing options...
Mc Matthew 2 Posted April 26, 2012 Author Share Posted April 26, 2012 OK will try that might not be today as it is a bit damp. As long as I can get it done without an engine out job i'll be happy Quote Link to comment Share on other sites More sharing options...
shebabby Posted April 26, 2012 Share Posted April 26, 2012 engine out / nosubframe off / maybea couple ov redbulls will keep you going till the jobs done Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.